TG TET పేపర్ 2 - 6_రసాయనశాస్త్రం - టెస్ట్ 46 - దైనందిన పదార్థాల రసాయనశాస్త్రం – సమగ్ర అన్వయం
Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
A mixture contains common salt and sand. Which sequence can be used to recover the salt while separating the sand?
సాధారణ ఉప్పు మరియు ఇసుక కలిసిన మిశ్రమం ఉంది. ఇసుకను వేరు చేస్తూ ఉప్పును తిరిగి పొందడానికి ఏ క్రమాన్ని ఉపయోగించవచ్చు?
Explanation:
• Common salt dissolves in water, whereas sand is insoluble in water.
• Filtration separates the insoluble sand from the salt solution.
• Evaporation of water from the filtrate leaves the dissolved salt behind.
• Filtration separates the insoluble sand from the salt solution.
• Evaporation of water from the filtrate leaves the dissolved salt behind.
వివరణ:
• సాధారణ ఉప్పు నీటిలో కరుగుతుంది; ఇసుక నీటిలో కరగదు.
• వడపోత ద్వారా కరగని ఇసుకను ఉప్పు ద్రావణం నుంచి వేరు చేయవచ్చు.
• వడపోత ద్రావణంలోని నీటిని ఆవిరి చేస్తే కరిగి ఉన్న ఉప్పు మిగులుతుంది.
• వడపోత ద్వారా కరగని ఇసుకను ఉప్పు ద్రావణం నుంచి వేరు చేయవచ్చు.
• వడపోత ద్రావణంలోని నీటిని ఆవిరి చేస్తే కరిగి ఉన్న ఉప్పు మిగులుతుంది.
Question 2
ప్రశ్న 2
Which method is most suitable for separating a mixture of kerosene and water?
కిరోసిన్ మరియు నీటి మిశ్రమాన్ని వేరు చేయడానికి అత్యంత అనుకూలమైన పద్ధతి ఏది?
Explanation:
• Kerosene and water are immiscible liquids and form separate layers.
• A separating funnel allows the lower layer to be drained separately from the upper layer.
• This method exploits immiscibility and the density difference between the liquids.
• A separating funnel allows the lower layer to be drained separately from the upper layer.
• This method exploits immiscibility and the density difference between the liquids.
వివరణ:
• కిరోసిన్ మరియు నీరు పరస్పరం కలవని ద్రవాలు; అవి వేర్వేరు పొరలను ఏర్పరుస్తాయి.
• వేర్పాటు గరాటుతో దిగువ పొరను పై పొర నుంచి విడిగా బయటకు తీసుకోవచ్చు.
• ఈ పద్ధతి పరస్పర అకలయిక స్వభావం మరియు సాంద్రత భేదాన్ని ఉపయోగిస్తుంది.
• వేర్పాటు గరాటుతో దిగువ పొరను పై పొర నుంచి విడిగా బయటకు తీసుకోవచ్చు.
• ఈ పద్ధతి పరస్పర అకలయిక స్వభావం మరియు సాంద్రత భేదాన్ని ఉపయోగిస్తుంది.
Question 3
ప్రశ్న 3
Acetone and water form a homogeneous mixture and have substantially different boiling points. Which method is suitable for separating them at the school level?
అసిటోన్ మరియు నీరు సమసమ మిశ్రమాన్ని ఏర్పరుస్తాయి మరియు వాటి మరిగే స్థానాల్లో గణనీయమైన భేదం ఉంది. పాఠశాల స్థాయిలో వాటిని వేరు చేయడానికి ఏ పద్ధతి అనుకూలం?
Explanation:
• Acetone and water are miscible, so a separating funnel cannot separate them into layers.
• Acetone has a much lower boiling point than water and vaporises first on controlled heating.
• The vapour can be condensed and collected by distillation.
• Acetone has a much lower boiling point than water and vaporises first on controlled heating.
• The vapour can be condensed and collected by distillation.
వివరణ:
• అసిటోన్ మరియు నీరు పరస్పరం కలిసే ద్రవాలు కాబట్టి వేర్పాటు గరాటుతో పొరలుగా వేరు చేయలేము.
• అసిటోన్ మరిగే స్థానం నీటి కంటే చాలా తక్కువగా ఉండటం వల్ల నియంత్రిత వేడిలో అది ముందుగా ఆవిరవుతుంది.
• ఆ ఆవిరిని ఘనీభవింపజేసి ఆసవనం ద్వారా సేకరించవచ్చు.
• అసిటోన్ మరిగే స్థానం నీటి కంటే చాలా తక్కువగా ఉండటం వల్ల నియంత్రిత వేడిలో అది ముందుగా ఆవిరవుతుంది.
• ఆ ఆవిరిని ఘనీభవింపజేసి ఆసవనం ద్వారా సేకరించవచ్చు.
Question 4
ప్రశ్న 4
Why is nylon suitable for applications such as strong ropes and parachute cords?
బలమైన తాళ్లు మరియు పారాచూట్ తాళ్ల వంటి ఉపయోగాలకు నైలాన్ ఎందుకు అనుకూలంగా ఉంటుంది?
Explanation:
• Nylon is a synthetic fibre noted for its high strength.
• Its strength together with relatively low weight makes it useful for ropes and parachute cords.
• Nylon is not selected for these applications because of electrical conductivity or water solubility.
• Its strength together with relatively low weight makes it useful for ropes and parachute cords.
• Nylon is not selected for these applications because of electrical conductivity or water solubility.
వివరణ:
• నైలాన్ అధిక బలం కలిగిన కృత్రిమ తంతువు.
• దాని బలం మరియు తులనాత్మకంగా తక్కువ బరువు తాళ్లు, పారాచూట్ తాళ్ల వంటి ఉపయోగాలకు అనుకూలంగా చేస్తాయి.
• విద్యుత్ వాహకత లేదా నీటిలో కరిగే లక్షణం కారణంగా నైలాన్ను ఈ ఉపయోగాలకు ఎంచుకోరు.
• దాని బలం మరియు తులనాత్మకంగా తక్కువ బరువు తాళ్లు, పారాచూట్ తాళ్ల వంటి ఉపయోగాలకు అనుకూలంగా చేస్తాయి.
• విద్యుత్ వాహకత లేదా నీటిలో కరిగే లక్షణం కారణంగా నైలాన్ను ఈ ఉపయోగాలకు ఎంచుకోరు.
Question 5
ప్రశ్న 5
Why is Bakelite suitable for handles of cooking utensils and electrical switches?
వంట పాత్రల హ్యాండిల్స్ మరియు విద్యుత్ స్విచ్లకు బేకలైట్ ఎందుకు అనుకూలంగా ఉంటుంది?
Explanation:
• Bakelite is a thermosetting plastic and does not soften readily again after setting.
• It is a poor conductor of heat, which is useful for utensil handles.
• Its electrical insulating property also makes it suitable for electrical switches and fittings.
• It is a poor conductor of heat, which is useful for utensil handles.
• Its electrical insulating property also makes it suitable for electrical switches and fittings.
వివరణ:
• బేకలైట్ ఒక థర్మోసెట్టింగ్ ప్లాస్టిక్; ఒకసారి గట్టిపడిన తర్వాత మళ్లీ సులభంగా మెత్తబడదు.
• ఇది వేడికి దుర్వాహకం కావడం వల్ల వంట పాత్రల హ్యాండిల్స్కు ఉపయోగకరం.
• విద్యుత్కు అవాహకంగా ఉండే లక్షణం వల్ల విద్యుత్ స్విచ్లు మరియు ఫిట్టింగ్స్కు కూడా అనుకూలం.
• ఇది వేడికి దుర్వాహకం కావడం వల్ల వంట పాత్రల హ్యాండిల్స్కు ఉపయోగకరం.
• విద్యుత్కు అవాహకంగా ఉండే లక్షణం వల్ల విద్యుత్ స్విచ్లు మరియు ఫిట్టింగ్స్కు కూడా అనుకూలం.
Question 6
ప్రశ్న 6
Which statement correctly distinguishes PVC from Bakelite?
PVC మరియు బేకలైట్ మధ్య తేడాను సరిగా తెలిపే వాక్యం ఏది?
Explanation:
• PVC is classified as a thermoplastic.
• Thermoplastics soften on heating and can be reshaped under suitable conditions.
• Bakelite is thermosetting and does not show the same repeated softening and remoulding behaviour.
• Thermoplastics soften on heating and can be reshaped under suitable conditions.
• Bakelite is thermosetting and does not show the same repeated softening and remoulding behaviour.
వివరణ:
• PVC ను థర్మోప్లాస్టిక్గా వర్గీకరిస్తారు.
• థర్మోప్లాస్టిక్స్ వేడి చేసినప్పుడు మెత్తబడి తగిన పరిస్థితుల్లో మళ్లీ ఆకారంలోకి మలచవచ్చు.
• బేకలైట్ థర్మోసెట్టింగ్ ప్లాస్టిక్; అది ఇదే విధంగా పదేపదే మెత్తబడి మళ్లీ మలచబడదు.
• థర్మోప్లాస్టిక్స్ వేడి చేసినప్పుడు మెత్తబడి తగిన పరిస్థితుల్లో మళ్లీ ఆకారంలోకి మలచవచ్చు.
• బేకలైట్ థర్మోసెట్టింగ్ ప్లాస్టిక్; అది ఇదే విధంగా పదేపదే మెత్తబడి మళ్లీ మలచబడదు.
Question 7
ప్రశ్న 7
A person has excess acid in the stomach during indigestion. Why can milk of magnesia provide relief?
అజీర్ణ సమయంలో కడుపులో అధిక ఆమ్లం ఉన్నప్పుడు మిల్క్ ఆఫ్ మాగ్నీషియా ఎందుకు ఉపశమనం ఇవ్వగలదు?
Explanation:
• The stomach contains hydrochloric acid, and excessive acid can contribute to indigestion.
• Milk of magnesia contains magnesium hydroxide, which is a mild base.
• The base neutralises excess stomach acid and thereby provides relief.
• Milk of magnesia contains magnesium hydroxide, which is a mild base.
• The base neutralises excess stomach acid and thereby provides relief.
వివరణ:
• కడుపులో హైడ్రోక్లోరిక్ ఆమ్లం ఉంటుంది; అది అధికంగా ఉన్నప్పుడు అజీర్ణానికి కారణమవవచ్చు.
• మిల్క్ ఆఫ్ మాగ్నీషియాలో మృదువైన క్షారం అయిన మెగ్నీషియం హైడ్రాక్సైడ్ ఉంటుంది.
• ఈ క్షారం అధిక కడుపు ఆమ్లాన్ని తటస్థీకరించడం ద్వారా ఉపశమనం కలిగిస్తుంది.
• మిల్క్ ఆఫ్ మాగ్నీషియాలో మృదువైన క్షారం అయిన మెగ్నీషియం హైడ్రాక్సైడ్ ఉంటుంది.
• ఈ క్షారం అధిక కడుపు ఆమ్లాన్ని తటస్థీకరించడం ద్వారా ఉపశమనం కలిగిస్తుంది.
Question 8
ప్రశ్న 8
A soil sample is excessively acidic. Which treatment is appropriate at the school level to reduce its acidity?
ఒక నేల నమూనా అధికంగా ఆమ్ల స్వభావం కలిగి ఉంది. దాని ఆమ్లత్వాన్ని తగ్గించడానికి పాఠశాల స్థాయిలో ఏ చికిత్స తగినది?
Explanation:
• Plants generally require soil within a suitable pH range.
• Excessively acidic soil can be treated with basic substances such as quicklime, CaO, or slaked lime, Ca(OH)₂.
• The base helps neutralise excess acidity in the soil.
• Excessively acidic soil can be treated with basic substances such as quicklime, CaO, or slaked lime, Ca(OH)₂.
• The base helps neutralise excess acidity in the soil.
వివరణ:
• మొక్కల ఆరోగ్యకరమైన వృద్ధికి నేల pH తగిన పరిధిలో ఉండాలి.
• అధిక ఆమ్లత్వం గల నేలను సున్నం CaO లేదా స్లేక్డ్ లైమ్ Ca(OH)₂ వంటి క్షార పదార్థాలతో చికిత్స చేయవచ్చు.
• ఈ క్షార పదార్థాలు నేలలోని అధిక ఆమ్లత్వాన్ని తటస్థీకరించడంలో సహాయపడతాయి.
• అధిక ఆమ్లత్వం గల నేలను సున్నం CaO లేదా స్లేక్డ్ లైమ్ Ca(OH)₂ వంటి క్షార పదార్థాలతో చికిత్స చేయవచ్చు.
• ఈ క్షార పదార్థాలు నేలలోని అధిక ఆమ్లత్వాన్ని తటస్థీకరించడంలో సహాయపడతాయి.
Question 9
ప్రశ్న 9
Why can a mild basic substance such as moist baking soda help after an ant sting in the standard school-level explanation?
ప్రామాణిక పాఠశాల స్థాయి వివరణ ప్రకారం చీమ కుట్టిన తర్వాత తడి బేకింగ్ సోడా వంటి మృదువైన క్షార పదార్థం ఎందుకు సహాయపడగలదు?
Explanation:
• The standard school-level example treats an ant sting as involving an acidic substance such as formic acid.
• Baking soda, sodium hydrogencarbonate, is mildly basic.
• Acid–base neutralisation helps reduce the effect of the acid.
• Baking soda, sodium hydrogencarbonate, is mildly basic.
• Acid–base neutralisation helps reduce the effect of the acid.
వివరణ:
• ప్రామాణిక పాఠశాల స్థాయి ఉదాహరణలో చీమ కుట్టినప్పుడు ఫార్మిక్ ఆమ్లం వంటి ఆమ్ల పదార్థం చేరుతుందని వివరిస్తారు.
• బేకింగ్ సోడా, సోడియం హైడ్రోజన్ కార్బోనేట్, మృదువైన క్షార స్వభావం కలిగి ఉంటుంది.
• ఆమ్ల–క్షార తటస్థీకరణ ద్వారా ఆమ్ల ప్రభావాన్ని తగ్గించడంలో ఇది సహాయపడుతుంది.
• బేకింగ్ సోడా, సోడియం హైడ్రోజన్ కార్బోనేట్, మృదువైన క్షార స్వభావం కలిగి ఉంటుంది.
• ఆమ్ల–క్షార తటస్థీకరణ ద్వారా ఆమ్ల ప్రభావాన్ని తగ్గించడంలో ఇది సహాయపడుతుంది.
Question 10
ప్రశ్న 10
Why is copper commonly suitable for making electrical wires?
విద్యుత్ తీగల తయారీలో రాగి సాధారణంగా ఎందుకు అనుకూలంగా ఉంటుంది?
Explanation:
• Copper has high electrical conductivity, so it carries current efficiently.
• Copper is ductile, meaning that it can be drawn into thin wires.
• The combination of conductivity and ductility makes it useful for electrical wiring.
• Copper is ductile, meaning that it can be drawn into thin wires.
• The combination of conductivity and ductility makes it useful for electrical wiring.
వివరణ:
• రాగికి మంచి విద్యుత్ వాహకత ఉండటం వల్ల విద్యుత్ ప్రవాహాన్ని సమర్థంగా వహిస్తుంది.
• రాగి సార్యత కలిగి ఉండటం వల్ల దాన్ని పలుచని తీగలుగా లాగవచ్చు.
• విద్యుత్ వాహకత మరియు సార్యత కలయిక రాగిని విద్యుత్ తీగలకు అనుకూలంగా చేస్తుంది.
• రాగి సార్యత కలిగి ఉండటం వల్ల దాన్ని పలుచని తీగలుగా లాగవచ్చు.
• విద్యుత్ వాహకత మరియు సార్యత కలయిక రాగిని విద్యుత్ తీగలకు అనుకూలంగా చేస్తుంది.
Question 11
ప్రశ్న 11
Why does painting an iron gate help protect it from rusting?
ఇనుప గేటుకు పెయింట్ వేయడం దాన్ని తుప్పు పట్టకుండా ఎందుకు రక్షిస్తుంది?
Explanation:
• Rusting of iron requires contact with oxygen and moisture.
• A continuous paint coating acts as a protective barrier between iron and its surroundings.
• Reducing contact with air and water slows the corrosion process.
• A continuous paint coating acts as a protective barrier between iron and its surroundings.
• Reducing contact with air and water slows the corrosion process.
వివరణ:
• ఇనుము తుప్పు పట్టడానికి ఆక్సిజన్ మరియు తేమతో సంపర్కం అవసరం.
• నిరంతర పెయింట్ పొర ఇనుము మరియు పరిసరాల మధ్య రక్షణ అవరోధంగా పనిచేస్తుంది.
• గాలి మరియు నీటితో సంపర్కాన్ని తగ్గించడం తుప్పు ప్రక్రియను నెమ్మదింపజేస్తుంది.
• నిరంతర పెయింట్ పొర ఇనుము మరియు పరిసరాల మధ్య రక్షణ అవరోధంగా పనిచేస్తుంది.
• గాలి మరియు నీటితో సంపర్కాన్ని తగ్గించడం తుప్పు ప్రక్రియను నెమ్మదింపజేస్తుంది.
Question 12
ప్రశ్న 12
An industrial waste stream is strongly acidic. Which treatment principle is appropriate before safe disposal according to the school-level neutralisation concept?
ఒక పారిశ్రామిక వ్యర్థ ద్రవం బలమైన ఆమ్ల స్వభావం కలిగి ఉంది. పాఠశాల స్థాయి తటస్థీకరణ భావన ప్రకారం సురక్షిత పారవేతకు ముందు ఏ చికిత్స సూత్రం తగినది?
Explanation:
• Strongly acidic waste can harm organisms and materials if released untreated.
• School-level neutralisation applies the principle that acids can be neutralised by suitable bases.
• Actual industrial treatment must be controlled appropriately rather than simply discharging the waste.
• School-level neutralisation applies the principle that acids can be neutralised by suitable bases.
• Actual industrial treatment must be controlled appropriately rather than simply discharging the waste.
వివరణ:
• బలమైన ఆమ్ల వ్యర్థాన్ని చికిత్స లేకుండా విడుదల చేస్తే జీవులకు మరియు పదార్థాలకు హాని కలగవచ్చు.
• తగిన క్షారంతో ఆమ్లాన్ని తటస్థీకరించవచ్చనే సూత్రాన్ని పాఠశాల స్థాయి తటస్థీకరణ భావనలో ఉపయోగిస్తారు.
• వాస్తవ పారిశ్రామిక చికిత్స నియంత్రితంగా జరగాలి; వ్యర్థాన్ని నేరుగా విడుదల చేయకూడదు.
• తగిన క్షారంతో ఆమ్లాన్ని తటస్థీకరించవచ్చనే సూత్రాన్ని పాఠశాల స్థాయి తటస్థీకరణ భావనలో ఉపయోగిస్తారు.
• వాస్తవ పారిశ్రామిక చికిత్స నియంత్రితంగా జరగాలి; వ్యర్థాన్ని నేరుగా విడుదల చేయకూడదు.
Question 13
ప్రశ్న 13
Which set of properties is most desirable for an ideal fuel?
ఆదర్శ ఇంధనానికి ఏ లక్షణాల సమూహం అత్యంత అనుకూలమైనది?
Explanation:
• A useful fuel should release a large amount of heat per unit mass or volume.
• It should be reasonably easy and safe to store, transport and ignite under controlled conditions.
• Lower smoke, harmful emissions and residue are also desirable fuel characteristics.
• It should be reasonably easy and safe to store, transport and ignite under controlled conditions.
• Lower smoke, harmful emissions and residue are also desirable fuel characteristics.
వివరణ:
• ఉపయోగకరమైన ఇంధనం యూనిట్ ద్రవ్యరాశి లేదా ఘనపరిమాణానికి అధిక ఉష్ణాన్ని విడుదల చేయాలి.
• నియంత్రిత పరిస్థితుల్లో దాన్ని నిల్వ చేయడం, రవాణా చేయడం మరియు ప్రజ్వలించడం సులభంగా, సురక్షితంగా ఉండాలి.
• తక్కువ పొగ, హానికర ఉద్గారాలు మరియు తక్కువ అవశేషం కూడా కావాల్సిన ఇంధన లక్షణాలు.
• నియంత్రిత పరిస్థితుల్లో దాన్ని నిల్వ చేయడం, రవాణా చేయడం మరియు ప్రజ్వలించడం సులభంగా, సురక్షితంగా ఉండాలి.
• తక్కువ పొగ, హానికర ఉద్గారాలు మరియు తక్కువ అవశేషం కూడా కావాల్సిన ఇంధన లక్షణాలు.
Question 14
ప్రశ్న 14
Why is CNG often preferred over wood as a fuel where suitable infrastructure is available?
తగిన మౌలిక సదుపాయాలు ఉన్న చోట కలపతో పోలిస్తే CNG ను ఇంధనంగా ఎందుకు ప్రాధాన్యంగా ఉపయోగిస్తారు?
Explanation:
• CNG is a gaseous fuel and generally burns more cleanly than wood.
• It produces far less smoke and does not leave the large ash residue associated with solid wood fuel.
• Reduced direct air-pollution emissions are an important practical advantage of CNG.
• It produces far less smoke and does not leave the large ash residue associated with solid wood fuel.
• Reduced direct air-pollution emissions are an important practical advantage of CNG.
వివరణ:
• CNG ఒక వాయు ఇంధనం మరియు సాధారణంగా కలప కంటే పరిశుభ్రంగా దహనమవుతుంది.
• ఇది చాలా తక్కువ పొగను ఉత్పత్తి చేస్తుంది మరియు ఘన కలప ఇంధనం మాదిరిగా అధిక బూడిద అవశేషాన్ని వదలదు.
• ప్రత్యక్ష వాయు కాలుష్య ఉద్గారాలు తగ్గడం CNG యొక్క ముఖ్యమైన ఆచరణాత్మక ప్రయోజనం.
• ఇది చాలా తక్కువ పొగను ఉత్పత్తి చేస్తుంది మరియు ఘన కలప ఇంధనం మాదిరిగా అధిక బూడిద అవశేషాన్ని వదలదు.
• ప్రత్యక్ష వాయు కాలుష్య ఉద్గారాలు తగ్గడం CNG యొక్క ముఖ్యమైన ఆచరణాత్మక ప్రయోజనం.
Question 15
ప్రశ్న 15
Fuel A has a calorific value of 50,000 kJ/kg and Fuel B has a calorific value of 25,000 kJ/kg. If equal masses of the fuels burn completely, how does the heat released by Fuel A compare with Fuel B?
ఇంధనం A యొక్క ఉష్ణ విలువ 50,000 kJ/kg మరియు ఇంధనం B యొక్క ఉష్ణ విలువ 25,000 kJ/kg. రెండు ఇంధనాల సమాన ద్రవ్యరాశులు పూర్తిగా దహనమైతే, A విడుదల చేసే ఉష్ణం B తో పోలిస్తే ఎలా ఉంటుంది?
Explanation:
• Calorific value is the heat released by complete combustion of a unit mass of fuel.
• For equal masses, heat released is proportional to calorific value.
• 50,000/25,000 = 2, so Fuel A releases twice as much heat as Fuel B.
• For equal masses, heat released is proportional to calorific value.
• 50,000/25,000 = 2, so Fuel A releases twice as much heat as Fuel B.
వివరణ:
• ఉష్ణ విలువ అంటే యూనిట్ ద్రవ్యరాశి ఇంధనం పూర్తిగా దహనమైనప్పుడు విడుదలయ్యే ఉష్ణం.
• సమాన ద్రవ్యరాశులకు విడుదలయ్యే ఉష్ణం ఉష్ణ విలువకు అనుపాతంగా ఉంటుంది.
• 50,000/25,000 = 2 కాబట్టి ఇంధనం A, ఇంధనం B కంటే రెండింతల ఉష్ణాన్ని విడుదల చేస్తుంది.
• సమాన ద్రవ్యరాశులకు విడుదలయ్యే ఉష్ణం ఉష్ణ విలువకు అనుపాతంగా ఉంటుంది.
• 50,000/25,000 = 2 కాబట్టి ఇంధనం A, ఇంధనం B కంటే రెండింతల ఉష్ణాన్ని విడుదల చేస్తుంది.
Question 16
ప్రశ్న 16
Which practice is most appropriate for reducing environmental problems associated with plastic waste?
ప్లాస్టిక్ వ్యర్థాలతో సంబంధం ఉన్న పర్యావరణ సమస్యలను తగ్గించడానికి అత్యంత తగిన ఆచరణ ఏది?
Explanation:
• Many commonly used plastics are non-biodegradable and can persist in the environment.
• Open burning of plastics can contribute to serious air pollution and is not an appropriate disposal method.
• Reducing use, reusing suitable articles and recycling can decrease the amount of plastic waste generated.
• Open burning of plastics can contribute to serious air pollution and is not an appropriate disposal method.
• Reducing use, reusing suitable articles and recycling can decrease the amount of plastic waste generated.
వివరణ:
• సాధారణంగా ఉపయోగించే అనేక ప్లాస్టిక్లు జీవవిఘటన చెందవు మరియు పర్యావరణంలో దీర్ఘకాలం నిలిచి ఉండవచ్చు.
• ప్లాస్టిక్ను బహిరంగంగా కాల్చడం తీవ్రమైన వాయు కాలుష్యానికి కారణమవవచ్చు; అది తగిన పారవేత పద్ధతి కాదు.
• వినియోగాన్ని తగ్గించడం, తగిన వస్తువులను మళ్లీ ఉపయోగించడం మరియు రీసైక్లింగ్ చేయడం ద్వారా ప్లాస్టిక్ వ్యర్థాల పరిమాణాన్ని తగ్గించవచ్చు.
• ప్లాస్టిక్ను బహిరంగంగా కాల్చడం తీవ్రమైన వాయు కాలుష్యానికి కారణమవవచ్చు; అది తగిన పారవేత పద్ధతి కాదు.
• వినియోగాన్ని తగ్గించడం, తగిన వస్తువులను మళ్లీ ఉపయోగించడం మరియు రీసైక్లింగ్ చేయడం ద్వారా ప్లాస్టిక్ వ్యర్థాల పరిమాణాన్ని తగ్గించవచ్చు.
Question 17
ప్రశ్న 17
A fabric is described as having a silk-like appearance but being produced from chemically treated wood pulp. Which fibre is it?
ఒక తంతువు పట్టువంటి రూపం కలిగి ఉండి, రసాయనికంగా చికిత్స చేసిన కలప గుజ్జు నుంచి తయారవుతుందని చెప్పారు. అది ఏ తంతువు?
Explanation:
• Rayon is produced from cellulose obtained from sources such as wood pulp and chemically processed into fibres.
• It has a silk-like appearance and has historically been called artificial silk.
• It should not be confused with nylon, which is a fully synthetic fibre.
• It has a silk-like appearance and has historically been called artificial silk.
• It should not be confused with nylon, which is a fully synthetic fibre.
వివరణ:
• రేయాన్ను కలప గుజ్జు వంటి మూలాల నుంచి పొందిన సెల్యులోజ్ను రసాయనికంగా ప్రాసెస్ చేసి తంతువులుగా తయారు చేస్తారు.
• ఇది పట్టువంటి రూపం కలిగి ఉండటం వల్ల కృత్రిమ పట్టు అని కూడా పిలిచారు.
• పూర్తిగా కృత్రిమ తంతువు అయిన నైలాన్తో దీనిని గందరగోళం చేయకూడదు.
• ఇది పట్టువంటి రూపం కలిగి ఉండటం వల్ల కృత్రిమ పట్టు అని కూడా పిలిచారు.
• పూర్తిగా కృత్రిమ తంతువు అయిన నైలాన్తో దీనిని గందరగోళం చేయకూడదు.
Question 18
ప్రశ్న 18
Why should clothing made from synthetic fibres be kept away from open flames?
కృత్రిమ తంతువులతో తయారైన దుస్తులను బహిరంగ మంటల నుంచి ఎందుకు దూరంగా ఉంచాలి?
Explanation:
• Many synthetic fibres soften or melt when exposed to sufficient heat.
• Molten synthetic material can stick to the skin and increase burn injury.
• Therefore synthetic clothing should be kept away from open flames and strong heat sources.
• Molten synthetic material can stick to the skin and increase burn injury.
• Therefore synthetic clothing should be kept away from open flames and strong heat sources.
వివరణ:
• అనేక కృత్రిమ తంతువులు తగినంత వేడికి గురైనప్పుడు మెత్తబడవచ్చు లేదా కరిగిపోవచ్చు.
• కరిగిన కృత్రిమ పదార్థం చర్మానికి అంటుకుని కాలిన గాయాన్ని మరింత తీవ్రమయ్యేలా చేయవచ్చు.
• అందువల్ల కృత్రిమ తంతు దుస్తులను బహిరంగ మంటలు మరియు తీవ్రమైన వేడి మూలాల నుంచి దూరంగా ఉంచాలి.
• కరిగిన కృత్రిమ పదార్థం చర్మానికి అంటుకుని కాలిన గాయాన్ని మరింత తీవ్రమయ్యేలా చేయవచ్చు.
• అందువల్ల కృత్రిమ తంతు దుస్తులను బహిరంగ మంటలు మరియు తీవ్రమైన వేడి మూలాల నుంచి దూరంగా ఉంచాలి.
Question 19
ప్రశ్న 19
Before heating, a mixture contains iron filings and sulphur powder. Which statement correctly compares it with the product formed after strong heating?
వేడి చేయడానికి ముందు ఒక మిశ్రమంలో ఇనుప రేణువులు మరియు సల్ఫర్ పొడి ఉన్నాయి. బలంగా వేడి చేసిన తర్వాత ఏర్పడే ఉత్పత్తితో పోల్చినప్పుడు సరైన వాక్యం ఏది?
Explanation:
• Before heating, iron and sulphur form a physical mixture and iron retains its magnetic property.
• Strong heating causes a chemical reaction that produces iron sulphide.
• Formation of a new compound means the original components can no longer be separated simply by the same physical magnetic method.
• Strong heating causes a chemical reaction that produces iron sulphide.
• Formation of a new compound means the original components can no longer be separated simply by the same physical magnetic method.
వివరణ:
• వేడి చేయడానికి ముందు ఇనుము మరియు సల్ఫర్ భౌతిక మిశ్రమంగా ఉంటాయి; ఇనుము తన అయస్కాంత లక్షణాన్ని కలిగి ఉంటుంది.
• బలంగా వేడి చేస్తే రసాయన చర్య జరిగి ఐరన్ సల్ఫైడ్ ఏర్పడుతుంది.
• కొత్త సమ్మేళనం ఏర్పడినందున అసలు భాగాలను అదే సాధారణ అయస్కాంత భౌతిక పద్ధతితో వేరు చేయలేము.
• బలంగా వేడి చేస్తే రసాయన చర్య జరిగి ఐరన్ సల్ఫైడ్ ఏర్పడుతుంది.
• కొత్త సమ్మేళనం ఏర్పడినందున అసలు భాగాలను అదే సాధారణ అయస్కాంత భౌతిక పద్ధతితో వేరు చేయలేము.
Question 20
ప్రశ్న 20
Why is an iron container unsuitable for storing dilute hydrochloric acid for a long period?
పలుచని హైడ్రోక్లోరిక్ ఆమ్లాన్ని ఎక్కువకాలం నిల్వ చేయడానికి ఇనుప పాత్ర ఎందుకు అనుకూలం కాదు?
Explanation:
• Iron is above hydrogen in the reactivity series and reacts with dilute hydrochloric acid.
• A representative reaction is Fe + 2HCl → FeCl₂ + H₂.
• Such reaction would corrode the iron container and contaminate the stored acid, so the material is unsuitable.
• A representative reaction is Fe + 2HCl → FeCl₂ + H₂.
• Such reaction would corrode the iron container and contaminate the stored acid, so the material is unsuitable.
వివరణ:
• క్రియాశీలత శ్రేణిలో ఇనుము హైడ్రోజన్ కంటే పైభాగంలో ఉండి పలుచని హైడ్రోక్లోరిక్ ఆమ్లంతో చర్య చేస్తుంది.
• ప్రతినిధి చర్య Fe + 2HCl → FeCl₂ + H₂.
• ఈ చర్య వల్ల ఇనుప పాత్ర క్షయం చెందడంతో పాటు నిల్వ చేసిన ఆమ్లం కలుషితమవుతుంది; అందువల్ల ఆ పదార్థం అనుకూలం కాదు.
• ప్రతినిధి చర్య Fe + 2HCl → FeCl₂ + H₂.
• ఈ చర్య వల్ల ఇనుప పాత్ర క్షయం చెందడంతో పాటు నిల్వ చేసిన ఆమ్లం కలుషితమవుతుంది; అందువల్ల ఆ పదార్థం అనుకూలం కాదు.
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: B. Add water to dissolve the salt, filter off the sand, and evaporate the filtrate సమాధానం: B. ఉప్పును కరిగించడానికి నీరు కలిపి, ఇసుకను వడపోసి, వడపోత ద్రావణంలోని నీటిని ఆవిరి చేయడం
-
Question 2 ప్రశ్న 2Answer: C. Separating funnel సమాధానం: C. వేర్పాటు గరాటు
-
Question 3 ప్రశ్న 3Answer: D. Distillation సమాధానం: D. ఆసవనం
-
Question 4 ప్రశ్న 4Answer: A. It is strong, relatively light and can withstand considerable tension సమాధానం: A. ఇది బలంగా, తులనాత్మకంగా తేలికగా ఉండి గణనీయమైన లాగుడు బలాన్ని తట్టుకోగలదు
-
Question 5 ప్రశ్న 5Answer: B. It is a thermosetting plastic and a poor conductor of heat and electricity సమాధానం: B. ఇది థర్మోసెట్టింగ్ ప్లాస్టిక్ మరియు వేడి, విద్యుత్కు దుర్వాహకం
-
Question 6 ప్రశ్న 6Answer: B. PVC is a thermoplastic that can soften on heating, whereas Bakelite is a thermosetting plastic సమాధానం: B. PVC వేడి చేసినప్పుడు మెత్తబడగల థర్మోప్లాస్టిక్; బేకలైట్ థర్మోసెట్టింగ్ ప్లాస్టిక్
-
Question 7 ప్రశ్న 7Answer: C. It contains magnesium hydroxide, a mild base that neutralises excess acid సమాధానం: C. ఇందులో అధిక ఆమ్లాన్ని తటస్థీకరించే మృదువైన క్షారం మెగ్నీషియం హైడ్రాక్సైడ్ ఉంటుంది
-
Question 8 ప్రశ్న 8Answer: D. Treat it with a base such as quicklime or slaked lime సమాధానం: D. సున్నం లేదా స్లేక్డ్ లైమ్ వంటి క్షార పదార్థంతో చికిత్స చేయడం
-
Question 9 ప్రశ్న 9Answer: A. It helps neutralise the acidic substance associated with the sting సమాధానం: A. కుట్టినప్పుడు చేరిన ఆమ్ల పదార్థాన్ని తటస్థీకరించడంలో ఇది సహాయపడుతుంది
-
Question 10 ప్రశ్న 10Answer: C. It is a good conductor of electricity and can be drawn into wires సమాధానం: C. ఇది మంచి విద్యుత్ వాహకం మరియు తీగలుగా లాగవచ్చు
-
Question 11 ప్రశ్న 11Answer: B. The paint layer reduces contact of iron with oxygen and moisture సమాధానం: B. పెయింట్ పొర ఇనుము ఆక్సిజన్ మరియు తేమతో సంపర్కాన్ని తగ్గిస్తుంది
-
Question 12 ప్రశ్న 12Answer: D. Treat it appropriately with a basic substance to neutralise excess acidity సమాధానం: D. అధిక ఆమ్లత్వాన్ని తటస్థీకరించడానికి తగిన క్షార పదార్థంతో చికిత్స చేయడం
-
Question 13 ప్రశ్న 13Answer: A. High calorific value, convenient handling, suitable ignition characteristics and relatively low pollution సమాధానం: A. అధిక ఉష్ణ విలువ, సులభమైన నిర్వహణ, తగిన ప్రజ్వలన లక్షణాలు మరియు తులనాత్మకంగా తక్కువ కాలుష్యం
-
Question 14 ప్రశ్న 14Answer: C. CNG generally burns more cleanly, producing much less smoke and solid residue than wood సమాధానం: C. CNG సాధారణంగా కలప కంటే పరిశుభ్రంగా దహనమై చాలా తక్కువ పొగ మరియు ఘన అవశేషాన్ని ఉత్పత్తి చేస్తుంది
-
Question 15 ప్రశ్న 15Answer: B. Fuel A releases twice as much heat సమాధానం: B. ఇంధనం A రెండింతల ఉష్ణాన్ని విడుదల చేస్తుంది
-
Question 16 ప్రశ్న 16Answer: A. Reduce unnecessary use, reuse suitable items and recycle wherever appropriate సమాధానం: A. అనవసర వినియోగాన్ని తగ్గించి, తగిన వస్తువులను మళ్లీ ఉపయోగించి, సాధ్యమైన చోట రీసైకిల్ చేయడం
-
Question 17 ప్రశ్న 17Answer: D. Rayon సమాధానం: D. రేయాన్
-
Question 18 ప్రశ్న 18Answer: C. Many synthetic fibres can melt on heating and may stick to the skin సమాధానం: C. అనేక కృత్రిమ తంతువులు వేడి వల్ల కరిగి చర్మానికి అంటుకునే ప్రమాదం ఉంది
-
Question 19 ప్రశ్న 19Answer: A. Before heating iron can be separated with a magnet; after reaction a new compound, iron sulphide, has formed సమాధానం: A. వేడి చేయడానికి ముందు అయస్కాంతంతో ఇనుమును వేరు చేయవచ్చు; చర్య తర్వాత ఐరన్ సల్ఫైడ్ అనే కొత్త సమ్మేళనం ఏర్పడుతుంది
-
Question 20 ప్రశ్న 20Answer: B. Iron can react with dilute hydrochloric acid, forming an iron salt and releasing hydrogen gas సమాధానం: B. ఇనుము పలుచని హైడ్రోక్లోరిక్ ఆమ్లంతో చర్య చేసి ఇనుము లవణాన్ని ఏర్పరుస్తూ హైడ్రోజన్ వాయువును విడుదల చేయగలదు
