TG TET పేపర్ 2 - 5_భౌతికశాస్త్రం - టెస్ట్ 44 - విద్యుత్ వలయాలు, ఆవేశం మరియు విద్యుత్ ప్రవాహం
Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
What is the main role of an electric cell in a simple circuit?
సరళ విద్యుత్ వలయంలో విద్యుత్ సెల్ యొక్క ప్రధాన పాత్ర ఏమిటి?
Explanation:
• An electric cell converts stored chemical energy into electrical energy.
• The cell maintains a potential difference between its terminals that can drive charge through a closed circuit.
• It does not create electric charge from nothing; it supplies energy to charges in the circuit.
• The cell maintains a potential difference between its terminals that can drive charge through a closed circuit.
• It does not create electric charge from nothing; it supplies energy to charges in the circuit.
వివరణ:
• విద్యుత్ సెల్లో నిల్వ ఉన్న రసాయన శక్తి విద్యుత్ శక్తిగా మారుతుంది.
• సెల్ తన ధ్రువాల మధ్య విభవ భేదాన్ని కలిగించి, మూసిన వలయంలో ఆవేశాల ప్రవాహాన్ని నడిపిస్తుంది.
• సెల్ శూన్యం నుంచి విద్యుత్ ఆవేశాన్ని సృష్టించదు; వలయంలోని ఆవేశాలకు శక్తిని అందిస్తుంది.
• సెల్ తన ధ్రువాల మధ్య విభవ భేదాన్ని కలిగించి, మూసిన వలయంలో ఆవేశాల ప్రవాహాన్ని నడిపిస్తుంది.
• సెల్ శూన్యం నుంచి విద్యుత్ ఆవేశాన్ని సృష్టించదు; వలయంలోని ఆవేశాలకు శక్తిని అందిస్తుంది.
Question 2
ప్రశ్న 2
When two or more electric cells are connected together to act as a source in a circuit, the combination is commonly called a:
రెండు లేదా అంతకంటే ఎక్కువ విద్యుత్ సెల్లను ఒక వలయంలో విద్యుత్ మూలంగా పనిచేసేలా కలిపితే, ఆ సముదాయాన్ని సాధారణంగా ఏమంటారు?
Explanation:
• In elementary circuit terminology, a combination of cells connected to act together as a source is called a battery.
• Cells may be connected in suitable arrangements according to the required application.
• A switch or filament is a different circuit component.
• Cells may be connected in suitable arrangements according to the required application.
• A switch or filament is a different circuit component.
వివరణ:
• ప్రాథమిక విద్యుత్ వలయ పరిభాషలో, కలిసి ఒక విద్యుత్ మూలంగా పనిచేసేలా కలిపిన సెల్ల సముదాయాన్ని బ్యాటరీ అంటారు.
• అవసరాన్ని బట్టి సెల్లను తగిన విధంగా కలపవచ్చు.
• స్విచ్ మరియు ఫిలమెంట్ వేరే వలయ భాగాలు.
• అవసరాన్ని బట్టి సెల్లను తగిన విధంగా కలపవచ్చు.
• స్విచ్ మరియు ఫిలమెంట్ వేరే వలయ భాగాలు.
Question 3
ప్రశ్న 3
Which statement about the terminals of a typical electric cell is correct?
సాధారణ విద్యుత్ సెల్ ధ్రువాల గురించి సరైన వాక్యం ఏది?
Explanation:
• A typical cell has two terminals labelled positive (+) and negative (-).
• These terminals provide the connection points for an external circuit.
• The potential difference between the terminals enables current when a conducting closed path is provided.
• These terminals provide the connection points for an external circuit.
• The potential difference between the terminals enables current when a conducting closed path is provided.
వివరణ:
• సాధారణ సెల్కు ధన (+) మరియు ఋణ (-) అనే రెండు ధ్రువాలు ఉంటాయి.
• బాహ్య విద్యుత్ వలయాన్ని కలపడానికి ఈ ధ్రువాలు సంపర్క బిందువులుగా పనిచేస్తాయి.
• వాహక మూసిన మార్గం ఉన్నప్పుడు ధ్రువాల మధ్య విభవ భేదం విద్యుత్ ప్రవాహం ఏర్పడటానికి సహాయపడుతుంది.
• బాహ్య విద్యుత్ వలయాన్ని కలపడానికి ఈ ధ్రువాలు సంపర్క బిందువులుగా పనిచేస్తాయి.
• వాహక మూసిన మార్గం ఉన్నప్పుడు ధ్రువాల మధ్య విభవ భేదం విద్యుత్ ప్రవాహం ఏర్పడటానికి సహాయపడుతుంది.
Question 4
ప్రశ్న 4
Which statement best describes a primary cell?
ప్రాథమిక ఘటం (primary cell) గురించి ఉత్తమంగా వివరించే వాక్యం ఏది?
Explanation:
• A primary cell is generally intended for non-rechargeable use.
• Its chemical reactions are not designed to be readily reversed by normal charging.
• This distinguishes primary cells from rechargeable secondary cells.
• Its chemical reactions are not designed to be readily reversed by normal charging.
• This distinguishes primary cells from rechargeable secondary cells.
వివరణ:
• ప్రాథమిక ఘటం సాధారణంగా రీచార్జ్ చేయకుండా ఉపయోగించడానికి రూపొందించబడుతుంది.
• సాధారణ చార్జింగ్ ద్వారా దాని రసాయన చర్యలను సులభంగా తిరోగమనంలో జరిపేలా రూపొందించరు.
• ఈ లక్షణం ప్రాథమిక ఘటాలను రీచార్జ్ చేయగల ద్వితీయ ఘటాల నుంచి వేరు చేస్తుంది.
• సాధారణ చార్జింగ్ ద్వారా దాని రసాయన చర్యలను సులభంగా తిరోగమనంలో జరిపేలా రూపొందించరు.
• ఈ లక్షణం ప్రాథమిక ఘటాలను రీచార్జ్ చేయగల ద్వితీయ ఘటాల నుంచి వేరు చేస్తుంది.
Question 5
ప్రశ్న 5
A cell, a working bulb and a switch are connected in one continuous loop. The switch is closed. What should happen under normal ideal conditions?
ఒక సెల్, పనిచేసే బల్బు మరియు స్విచ్ను ఒక నిరంతర వలయంగా కలిపారు. స్విచ్ మూసి ఉంది. సాధారణ ఆదర్శ పరిస్థితుల్లో ఏమి జరుగుతుంది?
Explanation:
• A closed switch completes the conducting path through the cell and bulb.
• Current can then flow around the complete circuit.
• With a suitable cell and functioning bulb, the bulb glows.
• Current can then flow around the complete circuit.
• With a suitable cell and functioning bulb, the bulb glows.
వివరణ:
• మూసిన స్విచ్ సెల్ మరియు బల్బు ద్వారా వాహక మార్గాన్ని పూర్తి చేస్తుంది.
• అప్పుడు పూర్తి వలయం గుండా విద్యుత్ ప్రవాహం జరగగలదు.
• తగిన సెల్ మరియు పనిచేసే బల్బు ఉంటే బల్బు వెలుగుతుంది.
• అప్పుడు పూర్తి వలయం గుండా విద్యుత్ ప్రవాహం జరగగలదు.
• తగిన సెల్ మరియు పనిచేసే బల్బు ఉంటే బల్బు వెలుగుతుంది.
Question 6
ప్రశ్న 6
A cell and a bulb are connected through a switch, but the switch is open. Why does the bulb not glow?
ఒక సెల్ మరియు బల్బును స్విచ్ ద్వారా కలిపారు; కానీ స్విచ్ తెరిచి ఉంది. బల్బు ఎందుకు వెలగదు?
Explanation:
• An open switch introduces a break in the circuit.
• Because the conducting path is incomplete, steady current cannot pass through the bulb.
• Closing the switch restores the complete conducting path.
• Because the conducting path is incomplete, steady current cannot pass through the bulb.
• Closing the switch restores the complete conducting path.
వివరణ:
• తెరిచిన స్విచ్ వలయంలో విరామాన్ని కలిగిస్తుంది.
• వాహక మార్గం పూర్తి కాకపోవడంతో బల్బు గుండా స్థిర విద్యుత్ ప్రవాహం జరగదు.
• స్విచ్ను మూస్తే పూర్తి వాహక మార్గం ఏర్పడుతుంది.
• వాహక మార్గం పూర్తి కాకపోవడంతో బల్బు గుండా స్థిర విద్యుత్ ప్రవాహం జరగదు.
• స్విచ్ను మూస్తే పూర్తి వాహక మార్గం ఏర్పడుతుంది.
Question 7
ప్రశ్న 7
Which of the following is a good electrical conductor in an ordinary school circuit?
సాధారణ పాఠశాల విద్యుత్ వలయంలో క్రింది వాటిలో మంచి విద్యుత్ వాహకం ఏది?
Explanation:
• Copper allows electric charge to move through it readily and is widely used for connecting wires.
• Materials that permit current readily are called electrical conductors.
• Dry rubber, glass and plastic are ordinarily treated as electrical insulators.
• Materials that permit current readily are called electrical conductors.
• Dry rubber, glass and plastic are ordinarily treated as electrical insulators.
వివరణ:
• రాగి ద్వారా విద్యుత్ ఆవేశాలు సులభంగా కదలగలవు; అందువల్ల దాన్ని అనుసంధాన తీగల్లో విస్తృతంగా ఉపయోగిస్తారు.
• విద్యుత్ ప్రవాహాన్ని సులభంగా అనుమతించే పదార్థాలను విద్యుత్ వాహకాలు అంటారు.
• పొడి రబ్బరు, గాజు మరియు ప్లాస్టిక్ను సాధారణంగా విద్యుత్ అవాహకాలుగా పరిగణిస్తారు.
• విద్యుత్ ప్రవాహాన్ని సులభంగా అనుమతించే పదార్థాలను విద్యుత్ వాహకాలు అంటారు.
• పొడి రబ్బరు, గాజు మరియు ప్లాస్టిక్ను సాధారణంగా విద్యుత్ అవాహకాలుగా పరిగణిస్తారు.
Question 8
ప్రశ్న 8
Which material is ordinarily used as an electrical insulator?
క్రింది వాటిలో సాధారణంగా విద్యుత్ అవాహకంగా ఉపయోగించే పదార్థం ఏది?
Explanation:
• Rubber ordinarily offers very high resistance to the movement of charge and is treated as an insulator.
• Insulating coverings are used around conducting wires for safety.
• Copper, iron and aluminium are electrical conductors.
• Insulating coverings are used around conducting wires for safety.
• Copper, iron and aluminium are electrical conductors.
వివరణ:
• రబ్బరు సాధారణంగా విద్యుత్ ఆవేశాల కదలికకు అధిక నిరోధాన్ని చూపుతుంది కాబట్టి దాన్ని అవాహకంగా పరిగణిస్తారు.
• భద్రత కోసం వాహక తీగల చుట్టూ అవాహక కవరింగ్లను ఉపయోగిస్తారు.
• రాగి, ఇనుము మరియు అల్యూమినియం విద్యుత్ వాహకాలు.
• భద్రత కోసం వాహక తీగల చుట్టూ అవాహక కవరింగ్లను ఉపయోగిస్తారు.
• రాగి, ఇనుము మరియు అల్యూమినియం విద్యుత్ వాహకాలు.
Question 9
ప్రశ్న 9
What is the SI unit of electric charge?
విద్యుత్ ఆవేశం యొక్క SI ప్రమాణం ఏది?
Explanation:
• The SI unit of electric charge is the coulomb, symbol C.
• Charge is represented commonly by Q.
• Ampere is the SI unit of electric current, not charge.
• Charge is represented commonly by Q.
• Ampere is the SI unit of electric current, not charge.
వివరణ:
• విద్యుత్ ఆవేశం యొక్క SI ప్రమాణం కూలంబ్; దాని సంకేతం C.
• విద్యుత్ ఆవేశాన్ని సాధారణంగా Qతో సూచిస్తారు.
• ఆంపియర్ విద్యుత్ ప్రవాహం యొక్క SI ప్రమాణం; ఆవేశం యొక్కది కాదు.
• విద్యుత్ ఆవేశాన్ని సాధారణంగా Qతో సూచిస్తారు.
• ఆంపియర్ విద్యుత్ ప్రవాహం యొక్క SI ప్రమాణం; ఆవేశం యొక్కది కాదు.
Question 10
ప్రశ్న 10
Which statement correctly defines electric current quantitatively?
విద్యుత్ ప్రవాహాన్ని పరిమాణాత్మకంగా సరిగ్గా నిర్వచించే వాక్యం ఏది?
Explanation:
• Electric current measures the rate of flow of electric charge through a cross-section.
• For an average current over a time interval, I = Q/t.
• Here Q is charge in coulombs and t is time in seconds.
• For an average current over a time interval, I = Q/t.
• Here Q is charge in coulombs and t is time in seconds.
వివరణ:
• వాహకం యొక్క అడ్డ విభాగం గుండా విద్యుత్ ఆవేశం ప్రవహించే రేటును విద్యుత్ ప్రవాహం అంటారు.
• ఒక కాల వ్యవధిలో సగటు విద్యుత్ ప్రవాహం I = Q/t.
• ఇక్కడ Qను కూలంబ్లలో, tను సెకన్లలో కొలుస్తారు.
• ఒక కాల వ్యవధిలో సగటు విద్యుత్ ప్రవాహం I = Q/t.
• ఇక్కడ Qను కూలంబ్లలో, tను సెకన్లలో కొలుస్తారు.
Question 11
ప్రశ్న 11
What does a current of 1 ampere mean?
1 ఆంపియర్ విద్యుత్ ప్రవాహం అంటే ఏమిటి?
Explanation:
• Current I = Q/t.
• Therefore 1 A = 1 C/s.
• Ampere measures charge flow rate, whereas coulomb measures charge.
• Therefore 1 A = 1 C/s.
• Ampere measures charge flow rate, whereas coulomb measures charge.
వివరణ:
• విద్యుత్ ప్రవాహం I = Q/t.
• కాబట్టి 1 A = 1 C/s.
• ఆంపియర్ ఆవేశ ప్రవాహ రేటును సూచిస్తే, కూలంబ్ ఆవేశ పరిమాణాన్ని సూచిస్తుంది.
• కాబట్టి 1 A = 1 C/s.
• ఆంపియర్ ఆవేశ ప్రవాహ రేటును సూచిస్తే, కూలంబ్ ఆవేశ పరిమాణాన్ని సూచిస్తుంది.
Question 12
ప్రశ్న 12
A charge of 12 C passes through a cross-section of a conductor in 3 s. What is the average current?
ఒక వాహకం అడ్డ విభాగం గుండా 3 sలో 12 C ఆవేశం ప్రవహించింది. సగటు విద్యుత్ ప్రవాహం ఎంత?
Explanation:
• Use I = Q/t.
• I = 12/3 = 4 A.
• The unit is ampere because 1 A = 1 C/s.
• I = 12/3 = 4 A.
• The unit is ampere because 1 A = 1 C/s.
వివరణ:
• I = Q/t సూత్రాన్ని ఉపయోగించాలి.
• I = 12/3 = 4 A.
• 1 A = 1 C/s కాబట్టి ఫలిత ప్రమాణం ఆంపియర్.
• I = 12/3 = 4 A.
• 1 A = 1 C/s కాబట్టి ఫలిత ప్రమాణం ఆంపియర్.
Question 13
ప్రశ్న 13
A total charge of 600 C passes through a wire in 2 minutes. What is the average current?
ఒక తీగ గుండా 2 నిమిషాల్లో మొత్తం 600 C ఆవేశం ప్రవహించింది. సగటు విద్యుత్ ప్రవాహం ఎంత?
Explanation:
• Convert time first: 2 minutes = 120 s.
• I = Q/t = 600/120 = 5 A.
• Using 2 directly without converting minutes to seconds would give an incorrect SI result.
• I = Q/t = 600/120 = 5 A.
• Using 2 directly without converting minutes to seconds would give an incorrect SI result.
వివరణ:
• ముందుగా కాలాన్ని మార్చాలి: 2 నిమిషాలు = 120 s.
• I = Q/t = 600/120 = 5 A.
• నిమిషాలను సెకన్లుగా మార్చకుండా 2ను నేరుగా ఉపయోగిస్తే SI ప్రమాణంలో తప్పు ఫలితం వస్తుంది.
• I = Q/t = 600/120 = 5 A.
• నిమిషాలను సెకన్లుగా మార్చకుండా 2ను నేరుగా ఉపయోగిస్తే SI ప్రమాణంలో తప్పు ఫలితం వస్తుంది.
Question 14
ప్రశ్న 14
A steady current of 2 A flows through a conductor for 15 s. How much charge crosses a cross-section of the conductor?
ఒక వాహకం గుండా 15 s పాటు 2 A స్థిర విద్యుత్ ప్రవాహం ఉంది. వాహకం అడ్డ విభాగం గుండా ఎంత ఆవేశం ప్రవహిస్తుంది?
Explanation:
• From I = Q/t, rearrange to Q = It.
• Q = 2 × 15 = 30 C.
• Thus 30 coulombs of charge cross the section in 15 seconds.
• Q = 2 × 15 = 30 C.
• Thus 30 coulombs of charge cross the section in 15 seconds.
వివరణ:
• I = Q/t నుంచి Q = It.
• Q = 2 × 15 = 30 C.
• కాబట్టి 15 సెకన్లలో 30 కూలంబ్ల ఆవేశం అడ్డ విభాగం గుండా ప్రవహిస్తుంది.
• Q = 2 × 15 = 30 C.
• కాబట్టి 15 సెకన్లలో 30 కూలంబ్ల ఆవేశం అడ్డ విభాగం గుండా ప్రవహిస్తుంది.
Question 15
ప్రశ్న 15
A current of 0.25 A flows for 2 minutes. How much charge passes through the circuit?
0.25 A విద్యుత్ ప్రవాహం 2 నిమిషాల పాటు ప్రవహించింది. వలయం గుండా ఎంత ఆవేశం ప్రవహిస్తుంది?
Explanation:
• Convert 2 minutes to 120 s.
• Q = It = 0.25 × 120 = 30 C.
• Therefore 30 coulombs of charge pass through the circuit.
• Q = It = 0.25 × 120 = 30 C.
• Therefore 30 coulombs of charge pass through the circuit.
వివరణ:
• 2 నిమిషాలు = 120 sగా మార్చాలి.
• Q = It = 0.25 × 120 = 30 C.
• కాబట్టి వలయం గుండా 30 కూలంబ్ల ఆవేశం ప్రవహిస్తుంది.
• Q = It = 0.25 × 120 = 30 C.
• కాబట్టి వలయం గుండా 30 కూలంబ్ల ఆవేశం ప్రవహిస్తుంది.
Question 16
ప్రశ్న 16
A current of 3 A transfers 360 C of charge through a conductor. How long does this take?
3 A విద్యుత్ ప్రవాహం ఒక వాహకం గుండా 360 C ఆవేశాన్ని తరలించింది. దీనికి ఎంత సమయం పడుతుంది?
Explanation:
• From I = Q/t, rearrange to t = Q/I.
• t = 360/3 = 120 s.
• Thus the required time is 120 seconds, or 2 minutes.
• t = 360/3 = 120 s.
• Thus the required time is 120 seconds, or 2 minutes.
వివరణ:
• I = Q/t నుంచి t = Q/I.
• t = 360/3 = 120 s.
• కాబట్టి అవసరమైన సమయం 120 సెకన్లు, అంటే 2 నిమిషాలు.
• t = 360/3 = 120 s.
• కాబట్టి అవసరమైన సమయం 120 సెకన్లు, అంటే 2 నిమిషాలు.
Question 17
ప్రశ్న 17
A current of 250 mA flows for 20 s. How much charge passes a cross-section of the conductor?
250 mA విద్యుత్ ప్రవాహం 20 s పాటు ప్రవహిస్తోంది. వాహకం అడ్డ విభాగం గుండా ఎంత ఆవేశం ప్రవహిస్తుంది?
Explanation:
• Convert current first: 250 mA = 0.250 A.
• Q = It = 0.250 × 20 = 5 C.
• Therefore 5 coulombs of charge pass the cross-section.
• Q = It = 0.250 × 20 = 5 C.
• Therefore 5 coulombs of charge pass the cross-section.
వివరణ:
• ముందుగా విద్యుత్ ప్రవాహాన్ని మార్చాలి: 250 mA = 0.250 A.
• Q = It = 0.250 × 20 = 5 C.
• కాబట్టి అడ్డ విభాగం గుండా 5 కూలంబ్ల ఆవేశం ప్రవహిస్తుంది.
• Q = It = 0.250 × 20 = 5 C.
• కాబట్టి అడ్డ విభాగం గుండా 5 కూలంబ్ల ఆవేశం ప్రవహిస్తుంది.
Question 18
ప్రశ్న 18
In the external metallic wires of a simple DC circuit, which statement correctly compares conventional current direction with electron drift direction?
సరళ DC వలయంలోని బాహ్య లోహ తీగల్లో సాంప్రదాయ విద్యుత్ ప్రవాహ దిశ మరియు ఎలక్ట్రాన్ల డ్రిఫ్ట్ దిశల మధ్య సంబంధాన్ని సరిగ్గా తెలిపేది ఏది?
Explanation:
• Conventional current direction is defined as the direction positive charge would move.
• In the external circuit it is conventionally taken from the positive terminal toward the negative terminal.
• In metallic conductors, the mobile electrons drift in the opposite direction.
• In the external circuit it is conventionally taken from the positive terminal toward the negative terminal.
• In metallic conductors, the mobile electrons drift in the opposite direction.
వివరణ:
• ధన ఆవేశం కదిలే దిశను సాంప్రదాయ విద్యుత్ ప్రవాహ దిశగా నిర్వచిస్తారు.
• బాహ్య వలయంలో ఇది సాంప్రదాయంగా ధన ధ్రువం నుంచి ఋణ ధ్రువం వైపు పరిగణించబడుతుంది.
• లోహ వాహకాల్లో చలించే ఎలక్ట్రాన్ల డ్రిఫ్ట్ దిశ దీనికి వ్యతిరేకంగా ఉంటుంది.
• బాహ్య వలయంలో ఇది సాంప్రదాయంగా ధన ధ్రువం నుంచి ఋణ ధ్రువం వైపు పరిగణించబడుతుంది.
• లోహ వాహకాల్లో చలించే ఎలక్ట్రాన్ల డ్రిఫ్ట్ దిశ దీనికి వ్యతిరేకంగా ఉంటుంది.
Question 19
ప్రశ్న 19
The positive terminal of a cell is connected by a wire to one terminal of a working bulb. The other bulb terminal is connected to one side of a switch, and the other side of the switch is connected back to the negative terminal of the cell. If the switch is closed, which statement is correct?
ఒక సెల్ ధన ధ్రువాన్ని తీగతో పనిచేసే బల్బు యొక్క ఒక ధ్రువానికి కలిపారు. బల్బు మరొక ధ్రువాన్ని స్విచ్ యొక్క ఒక వైపుకు, స్విచ్ మరొక వైపును తిరిగి సెల్ ఋణ ధ్రువానికి కలిపారు. స్విచ్ మూసి ఉంటే సరైన వాక్యం ఏది?
Explanation:
• The stated connections form one continuous path from the positive terminal through the bulb and closed switch back to the negative terminal.
• The position of the switch before or after the bulb in this single loop does not prevent it from completing the circuit.
• Under normal ideal conditions, current flows and the bulb can glow.
• The position of the switch before or after the bulb in this single loop does not prevent it from completing the circuit.
• Under normal ideal conditions, current flows and the bulb can glow.
వివరణ:
• చెప్పిన అనుసంధానాలు ధన ధ్రువం నుంచి బల్బు, మూసిన స్విచ్ గుండా తిరిగి ఋణ ధ్రువానికి చేరే నిరంతర మార్గాన్ని ఏర్పరుస్తాయి.
• ఈ ఒక్క వలయంలో స్విచ్ బల్బు ముందు లేదా తరువాత ఉండటం వలయం పూర్తవడాన్ని నిరోధించదు.
• సాధారణ ఆదర్శ పరిస్థితుల్లో విద్యుత్ ప్రవాహం జరిగి బల్బు వెలగగలదు.
• ఈ ఒక్క వలయంలో స్విచ్ బల్బు ముందు లేదా తరువాత ఉండటం వలయం పూర్తవడాన్ని నిరోధించదు.
• సాధారణ ఆదర్శ పరిస్థితుల్లో విద్యుత్ ప్రవాహం జరిగి బల్బు వెలగగలదు.
Question 20
ప్రశ్న 20
Circuit P carries a steady current of 6 A for 5 s. Circuit Q carries a steady current of 3 A for 10 s. How do the charges transferred compare?
P వలయంలో 5 s పాటు 6 A స్థిర విద్యుత్ ప్రవాహం ఉంది. Q వలయంలో 10 s పాటు 3 A స్థిర విద్యుత్ ప్రవాహం ఉంది. బదిలీ అయిన ఆవేశాలను పోలిస్తే సరైనది ఏది?
Explanation:
• For circuit P, Q = It = 6 × 5 = 30 C.
• For circuit Q, Q = It = 3 × 10 = 30 C.
• Therefore both circuits transfer the same charge even though their currents and times are different.
• For circuit Q, Q = It = 3 × 10 = 30 C.
• Therefore both circuits transfer the same charge even though their currents and times are different.
వివరణ:
• P వలయానికి Q = It = 6 × 5 = 30 C.
• Q వలయానికి Q = It = 3 × 10 = 30 C.
• కాబట్టి విద్యుత్ ప్రవాహాలు మరియు సమయాలు వేర్వేరుగా ఉన్నప్పటికీ రెండు వలయాలూ సమానమైన 30 C ఆవేశాన్ని బదిలీ చేస్తాయి.
• Q వలయానికి Q = It = 3 × 10 = 30 C.
• కాబట్టి విద్యుత్ ప్రవాహాలు మరియు సమయాలు వేర్వేరుగా ఉన్నప్పటికీ రెండు వలయాలూ సమానమైన 30 C ఆవేశాన్ని బదిలీ చేస్తాయి.
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: B. To convert chemical energy into electrical energy and provide the potential difference that drives current సమాధానం: B. రసాయన శక్తిని విద్యుత్ శక్తిగా మార్చి, విద్యుత్ ప్రవాహాన్ని నడిపించే విభవ భేదాన్ని అందించడం
-
Question 2 ప్రశ్న 2Answer: C. battery సమాధానం: C. బ్యాటరీ
-
Question 3 ప్రశ్న 3Answer: A. It has a positive terminal and a negative terminal సమాధానం: A. దానికి ఒక ధన ధ్రువం మరియు ఒక ఋణ ధ్రువం ఉంటాయి
-
Question 4 ప్రశ్న 4Answer: D. It is generally designed for use until its chemical reactants are substantially consumed and is not intended for ordinary recharging సమాధానం: D. దానిలోని రసాయన క్రియాశీల పదార్థాలు గణనీయంగా వినియోగించబడే వరకు ఉపయోగించడానికి రూపొందించబడుతుంది; సాధారణంగా మళ్లీ రీచార్జ్ చేయడానికి ఉద్దేశించబడదు
-
Question 5 ప్రశ్న 5Answer: B. Current can flow through the closed circuit and the bulb can glow సమాధానం: B. మూసిన వలయంలో విద్యుత్ ప్రవాహం జరగగలదు మరియు బల్బు వెలగగలదు
-
Question 6 ప్రశ్న 6Answer: A. The open switch breaks the conducting path, so there is no complete circuit for steady current సమాధానం: A. తెరిచిన స్విచ్ వాహక మార్గాన్ని విరిచేస్తుంది; అందువల్ల స్థిర విద్యుత్ ప్రవాహానికి పూర్తి వలయం ఉండదు
-
Question 7 ప్రశ్న 7Answer: C. Copper wire సమాధానం: C. రాగి తీగ
-
Question 8 ప్రశ్న 8Answer: D. Rubber సమాధానం: D. రబ్బరు
-
Question 9 ప్రశ్న 9Answer: B. coulomb సమాధానం: B. కూలంబ్
-
Question 10 ప్రశ్న 10Answer: C. It is the rate at which electric charge crosses a cross-section of a conductor సమాధానం: C. ఇది వాహకం యొక్క అడ్డ విభాగం గుండా విద్యుత్ ఆవేశం ప్రవహించే రేటు
-
Question 11 ప్రశ్న 11Answer: A. A charge of 1 coulomb crosses a cross-section in 1 second సమాధానం: A. 1 సెకనులో ఒక అడ్డ విభాగం గుండా 1 కూలంబ్ ఆవేశం ప్రవహించడం
-
Question 12 ప్రశ్న 12Answer || సమాధానం: D. 4 A
-
Question 13 ప్రశ్న 13Answer || సమాధానం: B. 5 A
-
Question 14 ప్రశ్న 14Answer || సమాధానం: C. 30 C
-
Question 15 ప్రశ్న 15Answer || సమాధానం: A. 30 C
-
Question 16 ప్రశ్న 16Answer || సమాధానం: D. 120 s
-
Question 17 ప్రశ్న 17Answer || సమాధానం: B. 5 C
-
Question 18 ప్రశ్న 18Answer: C. Conventional current is from positive toward negative, while electron drift is in the opposite direction సమాధానం: C. సాంప్రదాయ విద్యుత్ ప్రవాహ దిశ ధన ధ్రువం నుంచి ఋణ ధ్రువం వైపు ఉంటుంది; ఎలక్ట్రాన్ల డ్రిఫ్ట్ దిశ దీనికి వ్యతిరేకంగా ఉంటుంది
-
Question 19 ప్రశ్న 19Answer: A. A complete conducting loop exists, so current can flow through the bulb and it can glow సమాధానం: A. పూర్తి వాహక వలయం ఏర్పడుతుంది; అందువల్ల బల్బు గుండా విద్యుత్ ప్రవాహం జరిగి అది వెలగగలదు
-
Question 20 ప్రశ్న 20Answer: C. Both transfer 30 C of charge సమాధానం: C. రెండు వలయాలూ 30 C ఆవేశాన్ని బదిలీ చేస్తాయి
