Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
Under the small-deflection Euler-Bernoulli beam model, and using a sign convention in which the bending moment and curvature have the same sign, which differential relationship is used in the double-integration method?
Explanation:
The double-integration method begins with the moment-curvature relationship for an Euler-Bernoulli beam. Under the sign convention stated in the question, the curvature is represented by d²y/dx² for small slopes. Therefore EI d²y/dx² = M(x). Integrating once gives the beam slope and integrating a second time gives the transverse deflection. Hence Option A is correct.
వివరణ:
Question 2
ప్రశ్న 2
For a cantilever fixed at x = 0, which two boundary conditions must be imposed at the fixed end when solving the elastic-curve equation by integration?
Explanation:
A fixed support prevents both translation and rotation of the beam end. Therefore the transverse deflection at the fixed end is zero. The slope of the elastic curve at the same point is also zero. The bending moment and shear force at a fixed support are generally not zero because the support can develop both reactions. Hence Option A gives the correct geometric boundary conditions.
వివరణ:
Question 3
ప్రశ్న 3
A simply supported beam extends from x = 0 to x = L. Which boundary conditions are generally appropriate for determining the integration constants in the elastic-curve equation?
Explanation:
Ideal pin and roller supports prevent vertical displacement of the beam at their locations. Consequently y = 0 at both ends of a simply supported beam. These supports permit rotation, so the slopes at the supports are not generally zero. Although the bending moment is also zero at ideal simple end supports, the displacement conditions are the direct geometric boundary conditions commonly used after integrating the moment equation twice. Therefore Option A is correct.
వివరణ:
Question 4
ప్రశ్న 4
At a smooth interior point where a beam has a local maximum or minimum deflection, which condition must hold?
Explanation:
The slope of the elastic curve is the first derivative dy/dx. At a smooth local maximum or minimum of deflection, the tangent to the elastic curve is horizontal. Therefore dy/dx must be zero at that location. The bending moment or shear force need not be zero there. Hence Option C is correct.
వివరణ:
Question 5
ప్రశ్న 5
A simply supported beam and its loading are symmetric about midspan. Assuming constant EI and a unique smooth deflected shape, which statement is necessarily true at midspan?
Explanation:
Symmetry of geometry, loading and flexural rigidity produces a symmetric elastic curve. The tangent at the axis of symmetry must therefore be horizontal. Hence the slope at midspan is zero. The deflection at midspan is generally non-zero and is often the maximum deflection for standard symmetric loading. Therefore Option A is correct.
వివరణ:
Question 6
ప్రశ్న 6
What is the essential procedure of the double-integration method for beam deflection when EI is constant?
Explanation:
The bending-moment function M(x) is first related to beam curvature through EI y'' = M(x), subject to the adopted sign convention. The equation is integrated once to obtain EI y' and again to obtain EI y. Each integration introduces an integration constant. Those constants are evaluated by using support conditions and, when necessary, continuity conditions between beam regions. Therefore Option A correctly describes the method.
వివరణ:
Question 7
ప్రశ్న 7
In Macaulay notation, let ^n be defined as zero for x < a and as (x-a)^n for x >= a. What is the main advantage of this notation in beam-deflection calculations?
Explanation:
Macaulay or singularity notation activates a load contribution only after the coordinate passes its point of application. This makes it possible to write one bending-moment expression instead of several separate piecewise equations in many beam problems. Support reactions must still be found from equilibrium before the method is applied. Flexural rigidity also remains part of the elastic-curve equation. Therefore Option A is correct.
వివరణ:
Question 8
ప్రశ్న 8
Using the Macaulay-bracket definition stated in the previous question and taking downward loading as producing a negative contribution to the bending-moment function, what term is introduced by a UDL of intensity w that begins at x = a and continues to the right?
Explanation:
A UDL beginning at x = a has a resultant over the active length equal to w(x-a). That resultant acts at one-half of the active loaded length from the section. Its bending-moment contribution is therefore proportional to w(x-a)²/2. With the downward-load sign convention stated in the question, the contribution is negative. Hence the Macaulay moment term is -w²/2 and Option B is correct.
వివరణ:
Question 9
ప్రశ్న 9
A cantilever beam of length 2 m carries a downward point load of 10 kN at its free end. If E = 200 GPa and I = 60 × 10^6 mm^4, what are the magnitudes of the free-end slope and deflection?
Explanation:
For an end-loaded cantilever, integration of the linear bending-moment function gives the tip slope PL²/(2EI). Substitution gives 10000 × 2000²/[2 × 200000 × 60 × 10^6] = 0.001667 rad. The corresponding tip deflection is PL³/(3EI). This gives approximately 2.222 mm. Therefore Option B is correct.
వివరణ:
Question 10
ప్రశ్న 10
A cantilever beam 3 m long carries a UDL of 4 kN/m over its complete length. If E = 200 GPa and I = 80 × 10^6 mm^4, what are the magnitudes of the free-end slope and deflection?
Explanation:
For a cantilever under a full-span UDL, double integration gives a tip slope of wL³/(6EI). With w = 4 N/mm and L = 3000 mm, the slope is 0.001125 rad. The tip deflection is wL⁴/(8EI). Substitution gives 2.53125 mm. Therefore Option B is correct.
వివరణ:
Question 11
ప్రశ్న 11
A cantilever beam 2.5 m long is subjected to a pure end moment of 12 kN·m. If E = 200 GPa and I = 100 × 10^6 mm^4, what are the magnitudes of its free-end slope and deflection?
Explanation:
An end moment produces constant bending moment along the cantilever. Integrating EI y'' = M gives a slope magnitude ML/EI at the free end. Substitution gives 0.00150 rad. The free-end deflection is ML²/(2EI), which evaluates to 1.875 mm. Hence Option B is correct.
వివరణ:
Question 12
ప్రశ్న 12
A simply supported beam of span 4 m carries a central point load of 24 kN. If E = 200 GPa and I = 80 × 10^6 mm^4, what is the maximum deflection magnitude?
Explanation:
The loading and beam geometry are symmetric, so the maximum deflection occurs at midspan where the slope is zero. Double integration of either half of the beam gives the central deflection PL³/(48EI). Substituting P = 24000 N and L = 4000 mm gives 2.00 mm. The support deflections are zero and the two half-beam solutions satisfy continuity at the centre. Therefore Option B is correct.
వివరణ:
Question 13
ప్రశ్న 13
A simply supported beam 6 m long carries a UDL of 5 kN/m over the full span. If E = 200 GPa and I = 150 × 10^6 mm^4, what is the maximum deflection magnitude?
Explanation:
The elastic curve is symmetric and the maximum deflection occurs at the centre of the beam. Double integration of the bending-moment equation for a full-span UDL gives 5wL⁴/(384EI). Using w = 5 N/mm and L = 6000 mm gives 2.8125 mm. The result satisfies zero deflection at both simple supports and zero slope at the beam centre. Therefore Option C is correct.
వివరణ:
Question 14
ప్రశ్న 14
For the simply supported beam of span 4 m carrying a central point load of 24 kN with E = 200 GPa and I = 80 × 10^6 mm^4, what is the magnitude of the slope at either support?
Explanation:
For a simply supported beam with a central point load, the support-slope magnitude obtained from integration is PL²/(16EI). Substituting the stated values gives 24000 × 4000²/[16 × 200000 × 80 × 10^6]. The result is 0.00150 rad. The slopes at the two supports have equal magnitudes and opposite directions because the deflected curve is symmetric. Therefore Option C is correct.
వివరణ:
Question 15
ప్రశ్న 15
A simply supported beam of span 6 m carries a 30 kN point load 2 m from the left support. If E = 200 GPa and I = 120 × 10^6 mm^4, what is the deflection magnitude directly under the load?
Explanation:
Let a = 2 m and b = 4 m, so that L = a + b = 6 m. Applying equilibrium first gives the reactions needed for the piecewise or Macaulay bending-moment equation. Double integration and continuity give the deflection beneath an eccentric point load as Pa²b²/(3EIL). Substituting the values in consistent millimetre units gives approximately 4.444 mm. Therefore Option C is correct.
వివరణ:
Question 16
ప్రశ్న 16
For the same 6 m simply supported beam carrying 30 kN at 2 m from the left support, with E = 200 GPa and I = 120 × 10^6 mm^4, what is the magnitude of the slope at the left support?
Explanation:
For a point load P located a from the left support and b from the right support, integration gives the left-support slope magnitude Pb(L²-b²)/(6LEI). Here P = 30000 N, L = 6000 mm and b = 4000 mm. Substitution gives approximately 0.002778 rad. The right-support slope has a different magnitude because the loading is not symmetric. Therefore Option C is correct.
వివరణ:
Question 17
ప్రశ్న 17
A cantilever is 3 m long and carries a 10 kN point load at a point 1.5 m from the fixed end, leaving the outer 1.5 m unloaded. If E = 200 GPa and I = 60 × 10^6 mm^4, what is the free-end deflection magnitude?
Explanation:
Only the portion between the fixed end and the load has non-zero bending moment. At the load point, integration gives a deflection Pa³/(3EI) and a slope Pa²/(2EI). The unloaded outer segment has zero curvature, so it continues as a straight tangent from the load point. Consequently the free-end deflection is Pa²(3L-a)/(6EI). Substitution gives approximately 2.344 mm, so Option C is correct.
వివరణ:
Question 18
ప్రశ్న 18
If the flexural rigidity EI of a statically determinate beam is doubled while the loading and geometry remain unchanged, what happens to slopes and deflections under the linear small-deflection model?
Explanation:
The elastic-curve equation contains curvature proportional to M/EI. For a statically determinate beam, the bending-moment distribution is fixed by equilibrium and does not depend on EI. Doubling EI therefore halves the curvature everywhere. Integration then halves both slope and deflection, assuming the same homogeneous boundary conditions. Therefore Option B is correct.
వివరణ:
Question 19
ప్రశ్న 19
Two simply supported beams have identical span and loading. Beam A has E = 200 GPa and I = 60 × 10^6 mm^4, while Beam B has E = 100 GPa and I = 90 × 10^6 mm^4. What is the ratio of a corresponding deflection in Beam B to that in Beam A?
Explanation:
For identical loading and geometry in linear beam theory, corresponding deflections vary inversely with EI. Beam A has EI proportional to 200 × 60, while Beam B has EI proportional to 100 × 90. Thus δB/δA = E_A I_A/(E_B I_B) = 12000/9000. The ratio is approximately 1.33. Therefore Option C is correct.
వివరణ:
Question 20
ప్రశ్న 20
A 2 m cantilever carries an 8 kN point load at its free end. Its measured free-end deflection is 2.667 mm and E = 200 GPa. Assuming Euler-Bernoulli behaviour, what is I approximately?
Explanation:
For an end-loaded cantilever, the tip deflection is PL³/(3EI). Rearranging gives I = PL³/(3Eδ). Substituting P = 8000 N, L = 2000 mm, E = 200000 N/mm² and δ = 2.667 mm gives approximately 40 × 10^6 mm^4. The result uses the measured deformation to infer the bending section property under the assumed beam model. Therefore Option C is correct.
వివరణ:
Question 21
ప్రశ్న 21
An elastic curve has the form y = Cx²(3L-x), where x is measured from a fixed end and C is a non-zero constant. Which loading pattern is most consistent with this shape for a prismatic Euler-Bernoulli cantilever?
Explanation:
The curve automatically satisfies y = 0 and y' = 0 at x = 0, which are cantilever fixed-end conditions. Differentiating twice gives y'' proportional to L-x. Therefore the bending moment varies linearly and reaches zero at the free end. A linear moment diagram of this form is produced by a concentrated transverse load at the free end. Hence Option A is correct.
వివరణ:
Question 22
ప్రశ్న 22
Using Macaulay notation ^n = 0 for x < a and (x-a)^n for x >= a, a simply supported beam AB has span 6 m and carries an 18 kN downward point load at x = 2 m from A. Taking sagging moment as positive, which bending-moment expression is correct for 0 <= x <= 6 m?
Explanation:
Equilibrium gives the right reaction as 18 × 2/6 = 6 kN. The left reaction is therefore 18 - 6 = 12 kN. Before the point load, the moment is simply 12x. Once x passes 2 m, the downward 18 kN load contributes -18(x-2), represented by -18. Therefore Option A is correct.
వివరణ:
Question 23
ప్రశ్న 23
Why is a Macaulay expression particularly convenient for the beam in the previous question when applying the double-integration method?
Explanation:
Without singularity notation, the beam would normally be described by separate moment expressions on the two sides of the point load. Each region would then require careful continuity treatment after integration. The Macaulay bracket keeps the point-load contribution inactive until x reaches its application point. This allows one compact expression to be integrated while the global boundary conditions determine the integration constants. Therefore Option A is correct.
వివరణ:
Question 24
ప్రశ్న 24
Consider the following statements about beam deflection by integration methods:
1. At a fixed end, both deflection and slope are zero.
2. At an ideal simple support, deflection is zero but slope need not be zero.
3. At a smooth point of maximum or minimum deflection, the slope is zero.
4. Every point at which bending moment is zero must be a point of maximum deflection.
Which statements are correct?
1. At a fixed end, both deflection and slope are zero.
2. At an ideal simple support, deflection is zero but slope need not be zero.
3. At a smooth point of maximum or minimum deflection, the slope is zero.
4. Every point at which bending moment is zero must be a point of maximum deflection.
Which statements are correct?
Explanation:
Statement 1 is correct because a fixed support prevents both translation and rotation. Statement 2 is correct because a pin or roller prevents vertical displacement but permits rotation. Statement 3 is correct for a smooth elastic curve because an extremum of deflection has a horizontal tangent. Statement 4 is incorrect because zero bending moment means zero curvature under the elementary model, not necessarily zero slope or an extremum of deflection. Therefore Statements 1, 2 and 3 are correct and Option B is the unique answer.
వివరణ:
Question 25
ప్రశ్న 25
Match each constant-EI beam case with its standard maximum or free-end deflection magnitude:
1. Cantilever with free-end point load P
2. Cantilever with full-span UDL w
3. Simply supported beam with central point load P
4. Simply supported beam with full-span UDL w
P. PL^3/(48EI)
Q. wL^4/(8EI)
R. 5wL^4/(384EI)
S. PL^3/(3EI)
Which matching is correct?
1. Cantilever with free-end point load P
2. Cantilever with full-span UDL w
3. Simply supported beam with central point load P
4. Simply supported beam with full-span UDL w
P. PL^3/(48EI)
Q. wL^4/(8EI)
R. 5wL^4/(384EI)
S. PL^3/(3EI)
Which matching is correct?
Explanation:
An end-loaded cantilever has a free-end deflection PL³/(3EI), so item 1 matches S. A cantilever carrying a full-span UDL has free-end deflection wL⁴/(8EI), so item 2 matches Q. A simply supported beam with a central point load has maximum midspan deflection PL³/(48EI), so item 3 matches P. A simply supported beam under a full-span UDL has maximum midspan deflection 5wL⁴/(384EI), so item 4 matches R. Therefore Option A gives the correct complete matching.
వివరణ:
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: A. EI d²y/dx² = M(x) సమాధానం: A.
-
Question 2 ప్రశ్న 2Answer: A. y(0) = 0 and dy/dx at x = 0 is zero సమాధానం: A.
-
Question 3 ప్రశ్న 3Answer: A. y(0) = 0 and y(L) = 0 సమాధానం: A.
-
Question 4 ప్రశ్న 4Answer: C. Slope dy/dx must be zero. సమాధానం: C.
-
Question 5 ప్రశ్న 5Answer: A. The slope is zero. సమాధానం: A.
-
Question 6 ప్రశ్న 6Answer: A. Integrate the bending-moment function twice and determine the integration constants from boundary or continuity conditions. సమాధానం: A.
-
Question 7 ప్రశ్న 7Answer: A. It allows discontinuous point or distributed loads to be represented in a single expression over much of the beam. సమాధానం: A.
-
Question 8 ప్రశ్న 8Answer: B. -w²/2 సమాధానం: B.
-
Question 9 ప్రశ్న 9Answer: B. 0.001667 rad and 2.222 mm సమాధానం: B.
-
Question 10 ప్రశ్న 10Answer: B. 0.001125 rad and 2.531 mm సమాధానం: B.
-
Question 11 ప్రశ్న 11Answer: B. 0.00150 rad and 1.875 mm సమాధానం: B.
-
Question 12 ప్రశ్న 12Answer: B. 2.00 mm సమాధానం: B.
-
Question 13 ప్రశ్న 13Answer: C. 2.813 mm సమాధానం: C.
-
Question 14 ప్రశ్న 14Answer: C. 0.00150 rad సమాధానం: C.
-
Question 15 ప్రశ్న 15Answer: C. 4.444 mm సమాధానం: C.
-
Question 16 ప్రశ్న 16Answer: C. 0.002778 rad సమాధానం: C.
-
Question 17 ప్రశ్న 17Answer: C. 2.344 mm సమాధానం: C.
-
Question 18 ప్రశ్న 18Answer: B. Both become one-half. సమాధానం: B.
-
Question 19 ప్రశ్న 19Answer: C. 1.33 సమాధానం: C.
-
Question 20 ప్రశ్న 20Answer: C. 40 × 10^6 mm^4 సమాధానం: C.
-
Question 21 ప్రశ్న 21Answer: A. A concentrated transverse load at the free end సమాధానం: A.
-
Question 22 ప్రశ్న 22Answer: A. M(x) = 12x - 18 kN·m సమాధానం: A.
-
Question 23 ప్రశ్న 23Answer: A. The same integrated equation can account for the change in loading at x = 2 m without introducing separate integration constants for each region. సమాధానం: A.
-
Question 24 ప్రశ్న 24Answer: B. 1, 2 and 3 only సమాధానం: B.
-
Question 25 ప్రశ్న 25Answer: A. 1-S, 2-Q, 3-P, 4-R సమాధానం: A.
