Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
According to the first moment-area theorem, what does the algebraic area under the M/EI diagram between two points A and B represent?
Explanation:
The first moment-area theorem relates beam rotation directly to the area of the M/EI diagram. The algebraic area between A and B equals the change in slope between those two points. Positive and negative portions of the M/EI diagram must therefore be treated with their proper signs. The theorem does not by itself give the actual vertical displacement of either point. Therefore Option A is correct.
వివరణ:
Question 2
ప్రశ్న 2
According to the second moment-area theorem, the tangential deviation of point B from the tangent drawn to the elastic curve at point A equals which quantity?
Explanation:
The second moment-area theorem concerns tangential deviation rather than simply a change in slope. The deviation of B from the tangent drawn at A equals the algebraic moment of the M/EI area between A and B about B. Each elemental M/EI area is multiplied by its distance from B before integration. This quantity should not automatically be identified with the actual deflection of B unless the reference tangent has the appropriate known position and orientation. Therefore Option B is correct.
వివరణ:
Question 3
ప్రశ్న 3
For a cantilever fixed at A, why is the tangential deviation of the free end B from the tangent at A equal in magnitude to the actual deflection of B?
Explanation:
A fixed support prevents both translation and rotation. Therefore the elastic curve passes through A with zero displacement and zero slope. The tangent drawn at A consequently coincides locally with the original undeformed beam axis. The vertical distance of B from this tangent is therefore the actual transverse displacement of B relative to A. Hence Option A is correct.
వివరణ:
Question 4
ప్రశ్న 4
For a simply supported beam AB, the tangential deviation of B from the tangent drawn at A is generally not equal to the actual deflection of B. What is the main reason?
Explanation:
An ideal simple support prevents vertical displacement, so the actual deflection at B is zero. However, the beam is free to rotate at A and its tangent there generally has a non-zero slope. Extending that inclined tangent to B normally produces a point above or below the actual support level. The tangential deviation is the distance from B to this inclined tangent, not the absolute displacement of B from the undeformed axis. Therefore Option A is correct.
వివరణ:
Question 5
ప్రశ్న 5
In the conjugate-beam method, which correspondence between the real beam and conjugate beam is correct?
Explanation:
The conjugate beam is loaded by the real beam's M/EI diagram. Equilibrium relations in the conjugate beam then parallel the differential relationships governing the real beam's elastic curve. The conjugate-beam shear at a section represents the slope of the corresponding real-beam section. The conjugate-beam bending moment represents the real-beam transverse deflection at that location. Therefore Option A is correct.
వివరణ:
Question 6
ప్రశ్న 6
A real beam is a cantilever fixed at A and free at B. What are the corresponding end conditions of its conjugate beam?
Explanation:
At the fixed end A of the real beam, both slope and deflection are zero. Since conjugate shear represents slope and conjugate moment represents deflection, both conjugate shear and moment must be zero at A. Those are the end conditions of a free end in the conjugate beam. At the free end B of the real beam, slope and deflection are generally unconstrained, so the conjugate beam must be able to develop both shear and moment there, corresponding to a fixed end. Therefore Option B is correct.
వివరణ:
Question 7
ప్రశ్న 7
What is the usual conjugate-beam support corresponding to an ideal simple support of the real beam?
Explanation:
At an ideal simple support of the real beam, the transverse deflection is zero while the slope is generally unrestricted. Zero real-beam deflection requires zero bending moment at the corresponding point of the conjugate beam. The conjugate shear may remain non-zero because the real slope need not vanish. These conditions are provided by an ideal simple support in the conjugate beam. Therefore Option C is correct.
వివరణ:
Question 8
ప్రశ్న 8
If the flexural rigidity EI varies along a beam, which diagram must be used directly in the moment-area and conjugate-beam methods?
Explanation:
Beam curvature in elementary bending theory is proportional to M/EI rather than to M alone. Consequently the moment-area theorems require areas and first moments of the M/EI diagram. The conjugate beam is likewise loaded by the actual M/EI distribution. If EI varies, dividing the moment diagram by one constant EI would give incorrect curvature ordinates. Therefore Option C is correct.
వివరణ:
Question 9
ప్రశ్న 9
A cantilever beam 2 m long carries a 12 kN downward point load at its free end. If E = 200 GPa and I = 60 × 10^6 mm^4, what are the magnitudes of the free-end slope and deflection as obtained from the triangular M/EI diagram?
Explanation:
The M/EI diagram is triangular, with zero ordinate at the free end and maximum magnitude PL/EI at the fixed end. Its area equals PL²/(2EI), which by the first moment-area theorem is the magnitude of the free-end slope. Substitution gives a slope of 0.002 rad. Taking the first moment of this triangular area about the free end gives PL³/(3EI) = 2.667 mm. Therefore Option B is correct.
వివరణ:
Question 10
ప్రశ్న 10
A cantilever beam 2.5 m long carries a pure end moment of 10 kN·m. If E = 200 GPa and I = 80 × 10^6 mm^4, what are the magnitudes of the free-end slope and deflection?
Explanation:
A pure end moment produces a constant bending moment throughout the cantilever. The M/EI diagram is therefore rectangular with area ML/EI. This area equals the change in slope, giving a free-end slope magnitude of 0.0015625 rad. The centroid of the rectangle lies at midspan, so its first moment about the free end gives ML²/(2EI) = 1.953 mm. Therefore Option B is correct.
వివరణ:
Question 11
ప్రశ్న 11
A simply supported beam 5 m long carries a 30 kN point load at midspan. If E = 200 GPa and I = 100 × 10^6 mm^4, what are the magnitude of the slope at either support and the maximum deflection?
Explanation:
The loading and elastic curve are symmetric about midspan, so the slope at the centre is zero. Applying the first moment-area theorem to one half of the beam gives a support-slope magnitude PL²/(16EI). This evaluates to approximately 0.002344 rad. The corresponding maximum central deflection obtained by the moment-area or conjugate-beam method is PL³/(48EI) = 3.906 mm. Therefore Option B is correct.
వివరణ:
Question 12
ప్రశ్న 12
A simply supported beam 4 m long carries a UDL of 6 kN/m over its complete span. If E = 200 GPa and I = 120 × 10^6 mm^4, what are the support-slope magnitude and maximum midspan deflection?
Explanation:
For a full-span UDL on a simply supported beam, symmetry gives zero slope at midspan. The support-slope magnitude obtained from the M/EI area is wL³/(24EI). Substitution gives approximately 0.000667 rad. The maximum deflection at midspan is 5wL⁴/(384EI), which evaluates to approximately 0.833 mm. Therefore Option B is correct.
వివరణ:
Question 13
ప్రశ్న 13
Between points A and B separated by 4 m, the M/EI diagram is triangular, varying linearly from zero at A to 0.0015 m^-1 at B. What are the magnitudes of the change in slope from A to B and the tangential deviation of B from the tangent at A?
Explanation:
The triangular M/EI area is one-half times 4 m times 0.0015 m^-1. Its area is therefore 0.0030, which represents a slope change of 0.0030 rad. The centroid of this triangle lies one-third of the 4 m base from the larger ordinate at B. Its distance from B is therefore 4/3 m. The first moment is 0.0030 × 4/3 = 0.004 m = 4 mm, so Option B is correct.
వివరణ:
Question 14
ప్రశ్న 14
Between A and B, 3 m apart, the M/EI diagram is a positive rectangle of constant ordinate 0.002 m^-1. What are the change in slope and the tangential deviation of B from the tangent at A?
Explanation:
The area of the rectangular M/EI diagram is 0.002 × 3 = 0.006. By the first moment-area theorem, this is the change in slope in radians. The centroid of the rectangle is midway between A and B, so it lies 1.5 m from B. The first moment about B is therefore 0.006 × 1.5 = 0.009 m. Thus the tangential deviation is 9 mm and Option B is correct.
వివరణ:
Question 15
ప్రశ్న 15
A real cantilever of length 3 m carries an 8 kN point load at its free end. If E = 200 GPa and I = 90 × 10^6 mm^4, what are the magnitudes of the fixed-end reaction shear and fixed-end reaction moment in the corresponding conjugate beam?
Explanation:
The conjugate beam is free at the real fixed end and fixed at the real free end. Its triangular fictitious load is the real beam's M/EI diagram. The resultant magnitude of this triangular load is PL²/(2EI) = 0.002, which equals the magnitude of the conjugate fixed-end shear and therefore the real free-end slope. The resultant acts two-thirds of the span from the conjugate fixed end, giving a fixed-end moment of 0.004 m = 4 mm. Therefore Option B is correct.
వివరణ:
Question 16
ప్రశ్న 16
For a simply supported beam of span 5 m with a central 30 kN point load, E = 200 GPa and I = 100 × 10^6 mm^4, what do the conjugate-beam support reactions and midspan conjugate bending moment represent?
Explanation:
The real simply supported beam becomes a simply supported conjugate beam. Its fictitious loading is the triangular real-beam M/EI diagram on each half of the span. By symmetry, the conjugate reactions have equal magnitudes, and each is PL²/(16EI) = approximately 0.002344. These reactions are conjugate shears and therefore represent the magnitudes of the real support slopes. The conjugate bending moment at midspan equals the real midspan deflection of approximately 3.906 mm, so Option A is correct.
వివరణ:
Question 17
ప్రశ్న 17
For the simply supported beam of span 4 m carrying a full-span UDL of 6 kN/m with E = 200 GPa and I = 120 × 10^6 mm^4, what is the magnitude of each conjugate-beam support reaction?
Explanation:
The real bending-moment diagram is parabolic and symmetric, so the conjugate M/EI loading is also symmetric. The total fictitious load is the area of the real M/EI diagram. Each conjugate support carries one-half of this total because of symmetry. The resulting reaction magnitude is wL³/(24EI) = approximately 0.000667. This conjugate shear equals the magnitude of the slope at the corresponding real support, making Option B correct.
వివరణ:
Question 18
ప్రశ్న 18
At a point C of a real beam, the slope is zero but the deflection is not zero. What must be true at the corresponding point of the conjugate beam?
Explanation:
The conjugate-beam method identifies real slope with conjugate shear. Therefore zero slope at C requires the conjugate shear at C to be zero. Real deflection corresponds to conjugate bending moment. Since the real deflection is stated to be non-zero, the conjugate bending moment need not vanish there. Therefore Option B is correct.
వివరణ:
Question 19
ప్రశ్న 19
Which statement best compares the moment-area and conjugate-beam methods?
Explanation:
Both methods originate from the same moment-curvature relationship. The moment-area method interprets integration geometrically through areas and first moments of the M/EI diagram. The conjugate-beam method instead treats that same M/EI diagram as loading on an imaginary beam. Shear and moment in the conjugate beam then provide slope and deflection of the real beam. Therefore Option A correctly distinguishes the two methods.
వివరణ:
Question 20
ప్రశ్న 20
Why does a fixed end of the real beam correspond to a free end of the conjugate beam?
Explanation:
At a fixed real support, rotation is restrained, so the real-beam slope is zero. Translation is also restrained, so the real-beam deflection is zero. These correspond respectively to zero shear and zero bending moment in the conjugate beam. A free end is precisely an end at which both internal shear and bending moment are zero in the absence of applied end actions. Therefore Option A is correct.
వివరణ:
Question 21
ప్రశ్న 21
If an M/EI diagram contains both positive and negative regions between A and B, how should the moment-area theorems be applied?
Explanation:
Moment-area theorems are algebraic relationships based on the signed curvature M/EI. A positive-curvature region contributes an area with one sign, while a negative-curvature region contributes with the opposite sign. The net change in slope is the algebraic sum of all such areas. Tangential deviation similarly requires the algebraic sum of the first moments of those signed areas. Therefore Option C is correct.
వివరణ:
Question 22
ప్రశ్న 22
For a simply supported beam of span L carrying a central point load P, what M/EI area over the left half of the beam gives the magnitude of the left-support slope by the first moment-area theorem?
Explanation:
The reaction at each support is P/2 and the maximum bending moment at midspan is PL/4. Over the left half-span, the M/EI diagram is triangular with base L/2 and maximum ordinate PL/(4EI). Its area is one-half times L/2 times PL/(4EI), which equals PL²/(16EI). Because the slope at the symmetric midspan is zero, this area equals the magnitude of the left-support slope. Therefore Option B is correct.
వివరణ:
Question 23
ప్రశ్న 23
For a cantilever of length L carrying a full-span UDL w, the M/EI diagram is parabolic, with maximum magnitude at the fixed end and zero at the free end. Where is the centroid of this parabolic area measured from the fixed end, and what free-end deflection magnitude follows from the second moment-area theorem?
Explanation:
For a full-span UDL on a cantilever, the bending-moment magnitude varies as the square of the distance from the free end. The resulting parabolic M/EI area has its centroid at L/4 from the fixed end. Its total area is wL³/(6EI), which gives the free-end slope magnitude. The centroid is therefore 3L/4 from the free end, so the first moment about the free end is [wL³/(6EI)](3L/4) = wL⁴/(8EI). Therefore Option A is correct.
వివరణ:
Question 24
ప్రశ్న 24
Consider the following statements about moment-area and conjugate-beam methods:
1. The first moment-area theorem gives the change in slope between two points.
2. The second moment-area theorem gives a tangential deviation, which is not always the same as actual deflection.
3. In the conjugate beam, shear corresponds to real-beam slope and bending moment corresponds to real-beam deflection.
4. A fixed support in the real beam remains fixed in the conjugate beam.
Which statements are correct?
1. The first moment-area theorem gives the change in slope between two points.
2. The second moment-area theorem gives a tangential deviation, which is not always the same as actual deflection.
3. In the conjugate beam, shear corresponds to real-beam slope and bending moment corresponds to real-beam deflection.
4. A fixed support in the real beam remains fixed in the conjugate beam.
Which statements are correct?
Explanation:
Statement 1 correctly states the first moment-area theorem. Statement 2 is correct because the second theorem measures deviation from a specified tangent rather than automatically from the undeformed beam axis. Statement 3 is the fundamental real-beam to conjugate-beam correspondence. Statement 4 is incorrect because a real fixed support transforms into a free end in the conjugate beam. Therefore Statements 1, 2 and 3 are correct and Option B is the unique answer.
వివరణ:
Question 25
ప్రశ్న 25
Match each concept with its correct interpretation:
1. Area under M/EI between A and B
2. First moment of that M/EI area about B
3. Shear force in the conjugate beam
4. Bending moment in the conjugate beam
P. Real-beam deflection
Q. Change in real-beam slope
R. Tangential deviation of B from the tangent at A
S. Real-beam slope
Which matching is correct?
1. Area under M/EI between A and B
2. First moment of that M/EI area about B
3. Shear force in the conjugate beam
4. Bending moment in the conjugate beam
P. Real-beam deflection
Q. Change in real-beam slope
R. Tangential deviation of B from the tangent at A
S. Real-beam slope
Which matching is correct?
Explanation:
The area of the M/EI diagram between two points equals the change in slope, so item 1 matches Q. The first moment of that area about B gives the tangential deviation of B from the tangent at A, so item 2 matches R. Conjugate-beam shear represents the slope of the real beam, so item 3 matches S. Conjugate-beam bending moment represents real-beam deflection, so item 4 matches P. Therefore Option A gives the correct complete matching.
వివరణ:
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: A. The change in slope between A and B సమాధానం: A.
-
Question 2 ప్రశ్న 2Answer: B. The first moment of the M/EI diagram area between A and B about point B సమాధానం: B.
-
Question 3 ప్రశ్న 3Answer: A. Because the tangent at a fixed end is horizontal and the fixed-end displacement is zero సమాధానం: A.
-
Question 4 ప్రశ్న 4Answer: A. The actual deflection at B is zero, but the tangent at A is generally inclined rather than horizontal. సమాధానం: A.
-
Question 5 ప్రశ్న 5Answer: A. Real-beam slope corresponds to conjugate-beam shear, and real-beam deflection corresponds to conjugate-beam bending moment. సమాధానం: A.
-
Question 6 ప్రశ్న 6Answer: B. A becomes free and B becomes fixed. సమాధానం: B.
-
Question 7 ప్రశ్న 7Answer: C. An ideal simple support సమాధానం: C.
-
Question 8 ప్రశ్న 8Answer: C. The M/EI diagram using the local value of EI సమాధానం: C.
-
Question 9 ప్రశ్న 9Answer: B. 0.002 rad and 2.667 mm సమాధానం: B.
-
Question 10 ప్రశ్న 10Answer: B. 0.001563 rad and 1.953 mm సమాధానం: B.
-
Question 11 ప్రశ్న 11Answer: B. 0.002344 rad and 3.906 mm సమాధానం: B.
-
Question 12 ప్రశ్న 12Answer: B. 0.000667 rad and 0.833 mm సమాధానం: B.
-
Question 13 ప్రశ్న 13Answer: B. 0.0030 rad and 4 mm సమాధానం: B.
-
Question 14 ప్రశ్న 14Answer: B. 0.006 rad and 9 mm సమాధానం: B.
-
Question 15 ప్రశ్న 15Answer: B. 0.002 and 4 mm సమాధానం: B.
-
Question 16 ప్రశ్న 16Answer: A. Each conjugate reaction is about 0.002344 and represents a real support-slope magnitude; the midspan conjugate moment is about 3.906 mm and represents real midspan deflection. సమాధానం: A.
-
Question 17 ప్రశ్న 17Answer: B. 0.000667 సమాధానం: B.
-
Question 18 ప్రశ్న 18Answer: B. Conjugate shear is zero, but conjugate bending moment need not be zero. సమాధానం: B.
-
Question 19 ప్రశ్న 19Answer: A. Moment-area uses areas and first moments of the M/EI diagram, whereas the conjugate-beam method treats the M/EI diagram as a fictitious loading and obtains slope and deflection through beam statics. సమాధానం: A.
-
Question 20 ప్రశ్న 20Answer: A. Because real slope and deflection are both zero there, requiring both conjugate shear and conjugate moment to be zero. సమాధానం: A.
-
Question 21 ప్రశ్న 21Answer: C. The positive and negative areas and their first moments must be combined algebraically. సమాధానం: C.
-
Question 22 ప్రశ్న 22Answer: B. PL^2/(16EI) సమాధానం: B.
-
Question 23 ప్రశ్న 23Answer: A. Centroid at L/4; deflection = wL^4/(8EI) సమాధానం: A.
-
Question 24 ప్రశ్న 24Answer: B. 1, 2 and 3 only సమాధానం: B.
-
Question 25 ప్రశ్న 25Answer: A. 1-Q, 2-R, 3-S, 4-P సమాధానం: A.
