Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
For a close-coiled helical spring subjected to an axial load W, which description most accurately represents the principal action in the spring wire?
Explanation:
In a close-coiled helical spring, the helix angle is sufficiently small that the axial load produces mainly a twisting action in the wire. If D is the mean coil diameter, the twisting moment in the wire is approximately W(D/2). The axial load also produces a direct shear stress on the wire cross-section. Elementary spring theory often evaluates the torsional component first and then accounts for direct shear or a more refined correction where required. Therefore Option A correctly describes the basic stress action in a close-coiled helical spring.
వివరణ:
Question 2
ప్రశ్న 2
Neglecting the small contribution of direct shear deformation, what is the axial deflection δ of a close-coiled helical compression spring carrying load W, having mean coil diameter D, wire diameter d, n active coils and shear modulus G?
Explanation:
The axial deflection of a close-coiled helical spring is obtained from the torsional deformation of the spring wire. For n active coils, the standard elementary result is δ = 8WD^3n/(Gd^4). The strong fourth-power dependence on wire diameter makes wire size particularly important in spring stiffness. Deflection also increases directly with load and number of active coils and with the cube of the mean coil diameter. Therefore Option A is correct.
వివరణ:
Question 3
ప్రశ్న 3
For the same close-coiled helical spring model, which expression gives the spring stiffness k = W/δ?
Explanation:
Spring stiffness is defined as the load required per unit axial deflection. Using δ = 8WD^3n/(Gd^4), dividing W by δ gives k = Gd^4/(8D^3n). The result shows that stiffness increases strongly with wire diameter. It decreases as the mean coil diameter or the number of active turns increases. Hence Option B is correct.
వివరణ:
Question 4
ప్రశ్న 4
A close-coiled helical spring has mean coil diameter D = 80 mm and wire diameter d = 10 mm. Which pair correctly gives the spring index C and the elementary direct-shear correction factor Ks = 1 + 1/(2C)?
Explanation:
Spring index is defined as the ratio of mean coil diameter to wire diameter. Here C = D/d = 80/10 = 8. The elementary correction factor accounting for direct shear is Ks = 1 + 1/(2C). Therefore Ks = 1 + 1/16 = 1.0625. Hence Option B is correct.
వివరణ:
Question 5
ప్రశ్న 5
A close-coiled helical spring carries an axial load of 500 N. Its mean coil diameter is 80 mm, wire diameter is 10 mm, number of active coils is 8 and G = 80 GPa. Neglecting direct-shear deformation, what is the axial deflection?
Explanation:
The spring deflection is δ = 8WD^3n/(Gd^4). Using W = 500 N, D = 80 mm, n = 8, d = 10 mm and G = 80000 N/mm² gives the required displacement. Substitution yields δ = 20.48 mm. The result is dimensionally in millimetres because all length quantities were used in millimetres and G in N/mm². Therefore Option C is correct.
వివరణ:
Question 6
ప్రశ్న 6
For the spring in the previous question, what is the spring stiffness approximately?
Explanation:
Spring stiffness is k = W/δ. The applied load is 500 N and the calculated deflection is 20.48 mm. Therefore k = 500/20.48 = approximately 24.41 N/mm. The same value is obtained directly from Gd^4/(8D^3n). Hence Option B is correct.
వివరణ:
Question 7
ప్రశ్న 7
For the same spring with W = 500 N, D = 80 mm and d = 10 mm, what is the torsional shear stress in the wire when direct shear is neglected?
Explanation:
The axial load produces a torque of WD/2 in the spring wire. For a circular wire, the corresponding maximum torsional shear stress is τt = 8WD/(πd^3). Substituting the given values gives τt = 8 × 500 × 80/[π × 10^3]. The result is approximately 101.86 MPa. Therefore Option C is correct.
వివరణ:
Question 8
ప్రశ్న 8
For the spring with W = 500 N, D = 80 mm and d = 10 mm, what is the approximate maximum shear stress if the elementary direct shear 4W/(πd^2) is added to the torsional shear stress, while curvature stress concentration is neglected?
Explanation:
The torsional shear stress is approximately 101.86 MPa. The direct shear stress is 4W/(πd²) = 4 × 500/[π × 10²] = approximately 6.37 MPa. Under the stated elementary approximation, these two shear contributions are added. The resulting maximum shear stress is therefore approximately 108.23 MPa. Hence Option B is correct.
వివరణ:
Question 9
ప్రశ్న 9
For a close-coiled helical spring with load W, wire diameter d, number of active coils n and material unchanged, the mean coil diameter D is doubled. Neglecting direct-shear deformation, how do axial deflection and torsional shear stress change?
Explanation:
Spring deflection varies as D³ when all other parameters remain fixed. Doubling the mean coil diameter therefore multiplies the deflection by 2³ = 8. The torsional shear stress is proportional to WD/d³ and therefore varies directly with D. Doubling D consequently doubles the torsional shear stress. Thus Option C is correct.
వివరణ:
Question 10
ప్రశ్న 10
The wire diameter of a close-coiled helical spring is increased by 20 percent while G, D and the number of active coils remain unchanged. Approximately by what factor does the spring stiffness increase?
Explanation:
Spring stiffness varies with the fourth power of wire diameter. Increasing d by 20 percent changes the diameter ratio to 1.2. The stiffness ratio is therefore 1.2^4 = 2.0736. Thus the modified spring is slightly more than twice as stiff as the original spring. Therefore Option D is correct.
వివరణ:
Question 11
ప్రశ్న 11
A close-coiled helical spring is required to have stiffness 50 N/mm. The mean coil diameter is 60 mm, there are 10 active coils and G = 80 GPa. Neglecting direct-shear deformation, what wire diameter is required approximately?
Explanation:
The stiffness relation is k = Gd^4/(8D^3n). Rearranging gives d = [8D^3nk/G]^(1/4). Substitution of D = 60 mm, n = 10, k = 50 N/mm and G = 80000 N/mm² gives d approximately equal to 10.19 mm. The fourth-root dependence means substantial changes in stiffness can be achieved with relatively modest changes in wire diameter. Therefore Option C is correct.
వివరణ:
Question 12
ప్రశ్న 12
A close-coiled helical spring has W = 400 N, D = 75 mm, d = 10 mm and G = 80 GPa. If its measured axial deflection is 13.5 mm and the elementary torsional-deflection formula applies, how many active coils does it have?
Explanation:
The deflection relation is δ = 8WD^3n/(Gd^4). Solving for the number of active coils gives n = δGd^4/(8WD^3). Substituting δ = 13.5 mm and the remaining given data gives n = 8. The result is an integer because the numerical values have been selected consistently with the elementary spring formula. Therefore Option B is correct.
వివరణ:
Question 13
ప్రశ్న 13
The 500 N helical spring considered earlier deflects 20.48 mm in the linear-elastic range. What strain energy is stored in the spring under gradually applied loading?
Explanation:
For a linear spring loaded gradually from zero to W, the strain energy is U = Wδ/2. Here W = 500 N and δ = 20.48 mm. Thus U = 500 × 20.48/2 = 5120 N·mm. Since 1000 N·mm equals 1 joule, this is 5.12 J. Therefore Option B is correct.
వివరణ:
Question 14
ప్రశ్న 14
A linear spring has stiffness 40 N/mm and is compressed through 15 mm. Which pair correctly gives the applied load and stored strain energy?
Explanation:
For a linear spring, W = kδ. Thus W = 40 × 15 = 600 N. The strain energy is U = kδ²/2 or equivalently Wδ/2. This gives U = 40 × 15²/2 = 4500 N·mm = 4.50 J. Therefore Option B is correct.
వివరణ:
Question 15
ప్రశ్న 15
Two linear springs having stiffnesses 30 N/mm and 60 N/mm are connected in series. What is their equivalent stiffness?
Explanation:
Springs in series carry the same force while their deflections add. Therefore 1/keq = 1/k1 + 1/k2. Substituting 30 N/mm and 60 N/mm gives 1/keq = 1/30 + 1/60 = 1/20. Hence keq = 20 N/mm. Therefore Option A is correct.
వివరణ:
Question 16
ప్రశ్న 16
The two springs of stiffness 30 N/mm and 60 N/mm are connected in series and carry a load of 600 N. What are their individual deflections and the total deflection?
Explanation:
In a series arrangement, both springs carry the same load of 600 N. The first spring therefore deflects 600/30 = 20 mm. The second spring deflects 600/60 = 10 mm. The total system deflection is the sum, which is 30 mm. Hence Option B is correct.
వివరణ:
Question 17
ప్రశ్న 17
Two linear springs having stiffnesses 30 N/mm and 60 N/mm are connected in parallel between rigid plates. What is their equivalent stiffness?
Explanation:
Parallel springs between rigid plates undergo the same displacement. Their individual resisting forces add to give the total load. Consequently the equivalent stiffness is the sum of the individual stiffnesses. Thus keq = 30 + 60 = 90 N/mm. Therefore Option D is correct.
వివరణ:
Question 18
ప్రశ్న 18
The 30 N/mm and 60 N/mm springs are connected in parallel and support a total load of 600 N through rigid plates. What load is carried by each spring?
Explanation:
Parallel springs connected between rigid plates undergo the same deflection. Their common deflection is 600/(30 + 60) = 6.667 mm. The 30 N/mm spring therefore carries 30 × 6.667 ≈ 200 N. The 60 N/mm spring carries approximately 400 N. Hence Option B is correct.
వివరణ:
Question 19
ప్రశ్న 19
Two identical springs, each of stiffness k, are first connected in series and then connected in parallel. What are the equivalent stiffnesses of the two arrangements?
Explanation:
For two identical springs in series, reciprocal stiffnesses add. Thus 1/keq = 1/k + 1/k, giving keq = k/2. For two identical springs in parallel, stiffnesses add directly. The parallel equivalent stiffness is therefore 2k. Hence Option A is correct.
వివరణ:
Question 20
ప్రశ్న 20
A close-coiled helical spring has mean coil diameter 100 mm and wire diameter 12 mm. Using the elementary maximum-shear expression τmax = [8WD/(πd^3)][1 + 1/(2C)], where C = D/d, what axial load corresponds to τmax = 120 MPa approximately?
Explanation:
The spring index is C = 100/12 = approximately 8.333. The elementary direct-shear correction factor is therefore 1 + 1/(2C) = 1.06. Solving the given stress equation for W gives approximately 768.2 N. This calculation includes torsional shear and direct shear but deliberately excludes additional curvature stress concentration because the question specifies the elementary expression. Therefore Option C is correct.
వివరణ:
Question 21
ప్రశ్న 21
For the spring in the previous question, suppose there are 10 active coils and G = 80 GPa. At the load corresponding to the 120 MPa elementary shear-stress limit, what is the axial deflection approximately?
Explanation:
The load obtained from the stress condition is approximately 768.2 N. Using the elementary deflection equation δ = 8WD^3n/(Gd^4) gives the corresponding displacement. Substituting D = 100 mm, d = 12 mm, n = 10 and G = 80000 N/mm² gives approximately 37.05 mm. This illustrates that a spring can satisfy a stress criterion yet still experience a substantial deformation. Therefore Option C is correct.
వివరణ:
Question 22
ప్రశ్న 22
A uniform-width cantilever leaf spring is idealized as a rectangular beam of length 250 mm, width 50 mm and thickness 10 mm. It carries a 500 N end load and has E = 200 GPa. What are the maximum bending stress and free-end deflection approximately?
Explanation:
For a uniform rectangular cantilever leaf, the maximum bending stress is 6FL/(bt²). Substitution gives 6 × 500 × 250/(50 × 10²) = 150 MPa. Its tip deflection is FL³/(3EI), which is equivalently 4FL³/(Ebt³) for a rectangular section. Using the supplied dimensions and modulus gives 3.125 mm. Therefore Option B is correct.
వివరణ:
Question 23
ప్రశ్న 23
A constant-width cantilever leaf and an ideal triangular-width leaf of uniform strength have the same length, maximum width at the fixed end, thickness, material and end load. Using the standard elementary formulas, how does the triangular-width leaf compare with the constant-width leaf?
Explanation:
For the uniform-width rectangular cantilever leaf, the elementary tip deflection is 4FL³/(Ebt³). For the ideal triangular-width uniform-strength leaf with the same fixed-end width and thickness, the corresponding deflection is 6FL³/(Ebt³). Their maximum fixed-end bending stress is the same under the standard idealized comparison. Thus the tapered leaf deflects 6/4 = 1.5 times as much. Because U = Fδ/2 for linear loading, it also stores 1.5 times as much strain energy under the same load, making Option A correct.
వివరణ:
Question 24
ప్రశ్న 24
Consider the following statements about springs:
1. For a close-coiled helical spring, stiffness varies inversely with the number of active coils.
2. For a close-coiled helical spring, axial deflection varies with the cube of mean coil diameter when other parameters are fixed.
3. Springs connected in series carry the same force and their deflections add.
4. Springs connected in parallel between rigid plates necessarily carry equal forces even when their stiffnesses differ.
Which statements are correct?
1. For a close-coiled helical spring, stiffness varies inversely with the number of active coils.
2. For a close-coiled helical spring, axial deflection varies with the cube of mean coil diameter when other parameters are fixed.
3. Springs connected in series carry the same force and their deflections add.
4. Springs connected in parallel between rigid plates necessarily carry equal forces even when their stiffnesses differ.
Which statements are correct?
Explanation:
Statement 1 is correct because k = Gd^4/(8D^3n). Statement 2 is correct because δ = 8WD^3n/(Gd^4). Statement 3 is correct because the same series force passes through each spring while their extensions or compressions accumulate. Statement 4 is incorrect because parallel springs experience the same displacement, so their forces are proportional to their individual stiffnesses rather than necessarily being equal. Therefore Statements 1, 2 and 3 are correct and Option B is the unique answer.
వివరణ:
Question 25
ప్రశ్న 25
Match each spring quantity or system with its correct relationship:
1. Close-coiled helical spring deflection
2. Close-coiled helical spring stiffness
3. Two springs k1 and k2 in series
4. Two springs k1 and k2 in parallel
P. k1 + k2
Q. 8WD^3n/(Gd^4)
R. Gd^4/(8D^3n)
S. k1k2/(k1 + k2)
Which matching is correct?
1. Close-coiled helical spring deflection
2. Close-coiled helical spring stiffness
3. Two springs k1 and k2 in series
4. Two springs k1 and k2 in parallel
P. k1 + k2
Q. 8WD^3n/(Gd^4)
R. Gd^4/(8D^3n)
S. k1k2/(k1 + k2)
Which matching is correct?
Explanation:
The standard close-coiled helical spring deflection is 8WD³n/(Gd⁴), so item 1 matches Q. Its stiffness is the reciprocal load-deflection relation Gd⁴/(8D³n), so item 2 matches R. Two springs in series have equivalent stiffness k1k2/(k1 + k2), so item 3 matches S. Two springs in parallel have equivalent stiffness k1 + k2, so item 4 matches P. Therefore Option A gives the correct complete matching.
వివరణ:
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: A. The wire is subjected primarily to torsion due to a torque WD/2, together with direct shear due to W. సమాధానం: A.
-
Question 2 ప్రశ్న 2Answer: A. δ = 8WD^3n/(Gd^4) సమాధానం: A.
-
Question 3 ప్రశ్న 3Answer: B. k = Gd^4/(8D^3n) సమాధానం: B.
-
Question 4 ప్రశ్న 4Answer: B. C = 8 and Ks = 1.0625 సమాధానం: B.
-
Question 5 ప్రశ్న 5Answer: C. 20.48 mm సమాధానం: C.
-
Question 6 ప్రశ్న 6Answer: B. 24.41 N/mm సమాధానం: B.
-
Question 7 ప్రశ్న 7Answer: C. 101.86 MPa సమాధానం: C.
-
Question 8 ప్రశ్న 8Answer: B. 108.23 MPa సమాధానం: B.
-
Question 9 ప్రశ్న 9Answer: C. Deflection becomes eight times and torsional shear stress doubles. సమాధానం: C.
-
Question 10 ప్రశ్న 10Answer: D. 2.07 సమాధానం: D.
-
Question 11 ప్రశ్న 11Answer: C. 10.19 mm సమాధానం: C.
-
Question 12 ప్రశ్న 12Answer: B. 8 సమాధానం: B.
-
Question 13 ప్రశ్న 13Answer: B. 5.12 J సమాధానం: B.
-
Question 14 ప్రశ్న 14Answer: B. W = 600 N and U = 4.50 J సమాధానం: B.
-
Question 15 ప్రశ్న 15Answer: A. 20 N/mm సమాధానం: A.
-
Question 16 ప్రశ్న 16Answer: B. 20 mm, 10 mm and 30 mm respectively సమాధానం: B.
-
Question 17 ప్రశ్న 17Answer: D. 90 N/mm సమాధానం: D.
-
Question 18 ప్రశ్న 18Answer: B. 200 N and 400 N సమాధానం: B.
-
Question 19 ప్రశ్న 19Answer: A. Series = k/2 and parallel = 2k సమాధానం: A.
-
Question 20 ప్రశ్న 20Answer: C. 768 N సమాధానం: C.
-
Question 21 ప్రశ్న 21Answer: C. 37.05 mm సమాధానం: C.
-
Question 22 ప్రశ్న 22Answer: B. 150 MPa and 3.125 mm సమాధానం: B.
-
Question 23 ప్రశ్న 23Answer: A. It has the same maximum bending stress but 1.5 times the tip deflection and therefore 1.5 times the strain energy under the same load. సమాధానం: A.
-
Question 24 ప్రశ్న 24Answer: B. 1, 2 and 3 only సమాధానం: B.
-
Question 25 ప్రశ్న 25Answer: A. 1-Q, 2-R, 3-S, 4-P సమాధానం: A.
