Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
For a beam subjected to a transverse shear force V, which expression represents the elementary beam shear stress at a level where the local section width is b?
Explanation:
The elementary beam shear formula is τ = VQ/(Ib). Here V is the transverse shear force at the beam section. The quantity Q is the first moment of the appropriate portion of the cross-sectional area about the neutral axis. The quantity I is the second moment of the complete cross-section about that neutral axis, while b is the local width at the level where shear stress is required. Therefore Option A is correct.
వివరణ:
Question 2
ప్రశ్న 2
In the beam shear formula τ = VQ/(Ib), what does Q represent at a particular horizontal level of the cross-section?
Explanation:
Q is a first moment of area rather than a second moment of area. To determine shear stress at a chosen level, the area lying on one side of that level is selected. Its area is multiplied by the distance of its centroid from the neutral axis, or equivalently integrated as ∫y dA. The first moment of the complete area about its centroid would be zero and is not the Q required in the beam shear formula. Therefore Option B is correct.
వివరణ:
Question 3
ప్రశ్న 3
What are the dimensions of the first moment of area Q used in the beam shear formula?
Explanation:
A first moment of area is obtained by multiplying an area by a distance from the reference axis. Area has dimensions of length squared. Multiplication by a distance therefore gives dimensions of length cubed. Typical engineering units for Q are mm³ or m³. Hence Option C is correct.
వివరణ:
Question 4
ప్రశ్న 4
For a homogeneous rectangular beam section carrying a vertical shear force, which statement correctly describes the elementary transverse shear-stress distribution over the depth?
Explanation:
For a rectangular section, application of τ = VQ/(Ib) produces a parabolic variation of transverse shear stress over the depth. At the upper and lower free surfaces, the relevant first moment Q reduces to zero. The shear stress therefore vanishes at those extreme fibres. At the neutral axis, Q is maximum while the width remains constant, producing the maximum shear stress. Therefore Option C is correct.
వివరణ:
Question 5
ప్రశ్న 5
For a solid rectangular beam of area A subjected to transverse shear force V, what are the average shear stress and maximum transverse shear stress?
Explanation:
The nominal average shear stress is defined as the shear force divided by the complete cross-sectional area, so τavg = V/A. For a rectangular section, however, the actual transverse shear stress is not uniform. Its parabolic distribution reaches a maximum at the neutral axis. Evaluation of the beam shear formula gives τmax = 3V/(2A), which is 1.5 times the average value. Therefore Option B is correct.
వివరణ:
Question 6
ప్రశ్న 6
A rectangular beam section is 120 mm wide and 200 mm deep and carries a transverse shear force of 60 kN. What are the average and maximum transverse shear stresses?
Explanation:
The cross-sectional area is 120 × 200 = 24000 mm². The average shear stress is 60000/24000 = 2.50 N/mm², or 2.50 MPa. For a rectangular section, the maximum stress is 1.5 times the average stress. Thus τmax = 1.5 × 2.50 = 3.75 MPa. Therefore Option A is correct.
వివరణ:
Question 7
ప్రశ్న 7
The rectangular beam in the previous question has b = 120 mm, h = 200 mm and V = 60 kN. What is the transverse shear stress at a level 50 mm from the neutral axis?
Explanation:
For a rectangular section, τ = τmax[1 - 4y²/h²]. The maximum shear stress is 3.75 MPa and the specified distance is y = 50 mm. Therefore the reduction factor is 1 - 4(50²)/(200²) = 0.75. The required stress is 3.75 × 0.75 = 2.8125 MPa. Hence Option C is correct.
వివరణ:
Question 8
ప్రశ్న 8
In a rectangular beam of total depth 240 mm, at what distances from the neutral axis does the local transverse shear stress equal the average shear stress V/A?
Explanation:
For a rectangle, τ(y) = 1.5(V/A)[1 - 4y²/h²]. Setting the local stress equal to V/A gives 1.5[1 - 4y²/h²] = 1. Solving gives y = h/(2√3). With h = 240 mm, this gives y ≈ 69.3 mm on either side of the neutral axis. Therefore Option C is correct.
వివరణ:
Question 9
ప్రశ్న 9
A rectangular beam is 150 mm wide and carries a transverse shear force of 90 kN. If its maximum transverse shear stress is limited to 6 MPa, what minimum depth is required based only on this shear-stress condition?
Explanation:
For a rectangular section, τmax = 3V/(2A) = 3V/(2bh). Substitution gives 6 = 1.5 × 90000/(150h). This simplifies to 6 = 900/h. Therefore h = 150 mm. Hence Option C is correct.
వివరణ:
Question 10
ప్రశ్న 10
For a solid circular beam of radius R carrying transverse shear force V, which expression correctly describes the elementary transverse shear stress at a distance y from the centroidal neutral axis?
Explanation:
For a solid circular section, application of VQ/(Ib) gives a parabolic variation with the vertical coordinate y. The stress is greatest at y = 0 and falls to zero at y = ±R. The maximum value at the centroidal neutral axis is 4V/(3A). Thus the distribution can be written as τ = [4V/(3A)](1 - y²/R²). Therefore Option A is correct.
వివరణ:
Question 11
ప్రశ్న 11
A solid circular beam of diameter 120 mm carries a transverse shear force of 50 kN. What is its maximum transverse shear stress approximately?
Explanation:
The circular area is A = πd²/4 = π(120²)/4 ≈ 11309.7 mm². The average shear stress is therefore 50000/11309.7 ≈ 4.421 MPa. For a solid circular section, the maximum transverse shear stress is 4/3 times the average. This gives τmax ≈ 5.895 MPa. Therefore Option B is correct.
వివరణ:
Question 12
ప్రశ్న 12
For a solid circular section carrying a transverse shear force, what is the shear stress at a level y = R/2 from the neutral axis in relation to the average shear stress V/A?
Explanation:
For a solid circle, τ = [4V/(3A)](1 - y²/R²). At y = R/2, the geometric factor becomes 1 - 1/4 = 3/4. Multiplying 4V/(3A) by 3/4 gives exactly V/A. Thus the local shear stress at y = R/2 equals the nominal average shear stress. Therefore Option C is correct.
వివరణ:
Question 13
ప్రశ్న 13
A solid rectangular section and a solid circular section have the same cross-sectional area and carry the same transverse shear force. What is the ratio of the maximum shear stress in the rectangle to that in the circle?
Explanation:
For the rectangle, τmax = 3V/(2A). For the solid circle, τmax = 4V/(3A). Their ratio is therefore (3/2)/(4/3). This evaluates to 9/8, or 1.125. Hence the rectangular section has a 12.5 percent larger maximum shear stress under these equal-area and equal-shear-force conditions, making Option D correct.
వివరణ:
Question 14
ప్రశ్న 14
For a conventional symmetric I-section subjected to vertical shear, which qualitative statement is most accurate under elementary beam shear theory?
Explanation:
The beam shear formula contains the local width or thickness in its denominator. The web of a typical I-section is much thinner than the flange width, while Q is substantial near the neutral axis. Consequently the transverse shear stress becomes relatively large in the web. The maximum value for a conventional symmetric I-section generally occurs at the neutral axis within the web. Therefore Option B is correct.
వివరణ:
Question 15
ప్రశ్న 15
A symmetric I-section has overall depth 300 mm, two flanges each 150 mm × 20 mm, and a 10 mm thick web of clear depth 260 mm. Its centroidal second moment of area is 132.447 × 10^6 mm^4. If V = 80 kN, what is the maximum transverse shear stress at the neutral axis approximately?
Explanation:
At the neutral axis, Q includes the complete top flange and the upper half of the web. The top flange contributes 3000 × 140 = 420000 mm³, while the upper half-web contributes 1300 × 65 = 84500 mm³. Thus Q = 504500 mm³ and the local width is the 10 mm web thickness. Using τ = VQ/(Ib) gives 80000 × 504500/(132.447 × 10^6 × 10) ≈ 30.47 MPa. Therefore Option D is correct.
వివరణ:
Question 16
ప్రశ్న 16
For the same I-section and V = 80 kN, consider the flange-web junction. Using elementary beam shear theory, Q at the junction is 420000 mm^3. What are the shear flow q and the corresponding shear stresses obtained just inside the 10 mm web and just inside the 150 mm flange, respectively?
Explanation:
Shear flow is q = VQ/I. Substitution gives q = 80000 × 420000/(132.447 × 10^6) ≈ 253.7 N/mm. Within the 10 mm web, τ = q/t = 253.7/10 ≈ 25.37 MPa. Using the 150 mm flange width in the elementary formula gives τ ≈ 253.7/150 = 1.69 MPa immediately on the flange side. Therefore Option A is correct.
వివరణ:
Question 17
ప్రశ్న 17
At a particular level in a beam, V = 75 kN, Q = 300000 mm^3 and I = 90 × 10^6 mm^4. What are the shear flow and the shear stress if the local thickness is 10 mm?
Explanation:
Shear flow is defined as q = VQ/I. Substitution gives q = 75000 × 300000/(90 × 10^6) = 250 N/mm. The local shear stress is related to shear flow by τ = q/t. With t = 10 mm, τ = 250/10 = 25 N/mm², or 25 MPa. Therefore Option B is correct.
వివరణ:
Question 18
ప్రశ్న 18
Which statement correctly distinguishes shear flow q from transverse shear stress τ in elementary beam theory?
Explanation:
Shear flow is defined as the shear force transferred per unit longitudinal length along a layer or connection. Its units are therefore force per unit length, such as N/mm. In a region of local thickness t, the relation between shear flow and shear stress is q = τt. Equivalently, elementary beam theory gives q = VQ/I. Therefore Option A is correct.
వివరణ:
Question 19
ప్రశ్న 19
Why are transverse shear stresses associated with a varying bending moment along a beam?
Explanation:
Bending stress depends on the bending moment at a cross-section. If bending moment varies along the beam, neighbouring sections have slightly different longitudinal bending-stress resultants. Equilibrium requires these differences in longitudinal force to be transferred between adjacent layers. That transfer produces longitudinal and complementary transverse shear stresses. Therefore Option A correctly explains the equilibrium origin of beam shear stress.
వివరణ:
Question 20
ప్రశ్న 20
A beam segment is in ideal pure bending with constant bending moment and zero transverse shear force. What does the elementary beam shear formula predict for transverse shear stress on its cross-section?
Explanation:
The elementary beam shear relation is τ = VQ/(Ib). In ideal pure bending, the bending moment is constant along the beam segment. Therefore dM/dx and hence the transverse shear force V are zero. Substituting V = 0 into the beam shear formula gives zero transverse shear stress. Therefore Option C is correct.
వివరణ:
Question 21
ప్రశ్న 21
At the neutral axis of a homogeneous rectangular beam subjected simultaneously to a non-zero bending moment and a non-zero transverse shear force, which stress condition is expected under elementary beam theory?
Explanation:
The flexure formula gives longitudinal bending stress proportional to distance from the neutral axis. At the neutral axis that distance is zero, so the bending normal stress is zero. For a rectangular section, the first moment Q reaches its largest relevant value at the neutral axis. The transverse shear-stress distribution is therefore maximum there when V is non-zero. Hence Option C is correct.
వివరణ:
Question 22
ప్రశ్న 22
In a rectangular beam, what is the transverse shear stress at y = h/4 from the neutral axis expressed in terms of the average shear stress V/A?
Explanation:
For a rectangle, τ = 1.5(V/A)[1 - 4y²/h²]. At y = h/4, the bracket becomes 1 - 4(1/16) = 3/4. Therefore τ = 1.5 × 0.75(V/A). This gives τ = 1.125 V/A. Hence Option C is correct.
వివరణ:
Question 23
ప్రశ్న 23
For the symmetric I-section with total area 8600 mm² described earlier, a vertical shear force of 80 kN produces a maximum web shear stress of approximately 30.47 MPa. How does this compare with the nominal average shear stress V/A over the complete section?
Explanation:
The total area of the section is 8600 mm². Therefore the nominal average shear stress is 80000/8600 ≈ 9.30 MPa. The previously calculated maximum shear stress in the web is approximately 30.47 MPa. Their ratio is approximately 30.47/9.30 = 3.28. This demonstrates why V/A should not be confused with the actual maximum shear stress in an I-section, so Option A is correct.
వివరణ:
Question 24
ప్రశ్న 24
Consider the following statements about transverse shear stress in beams:
1. For a rectangular section, the maximum transverse shear stress is 1.5 times V/A.
2. For a solid circular section, the maximum transverse shear stress is 4/3 times V/A.
3. In a conventional symmetric I-section under vertical shear, the maximum transverse shear stress generally occurs in a flange at its outer edge.
4. Shear flow is given by q = VQ/I.
Which statements are correct?
1. For a rectangular section, the maximum transverse shear stress is 1.5 times V/A.
2. For a solid circular section, the maximum transverse shear stress is 4/3 times V/A.
3. In a conventional symmetric I-section under vertical shear, the maximum transverse shear stress generally occurs in a flange at its outer edge.
4. Shear flow is given by q = VQ/I.
Which statements are correct?
Explanation:
Statement 1 is correct for a solid rectangular section. Statement 2 is correct for a solid circular section under the elementary beam-shear model. Statement 3 is incorrect because a conventional symmetric I-section generally develops its largest vertical shear stress in the web near the neutral axis rather than at an outer flange surface. Statement 4 is correct because shear flow is q = VQ/I and local shear stress can be obtained from τ = q/t. Therefore Statements 1, 2 and 4 are correct and Option B is the unique answer.
వివరణ:
Question 25
ప్రశ్న 25
Match each section or quantity with its correct transverse-shear characteristic:
1. Solid rectangular section
2. Solid circular section
3. Conventional symmetric I-section under vertical shear
4. Shear flow q
P. Maximum shear stress = 4V/(3A)
Q. Maximum shear stress generally occurs in the web near the neutral axis
R. Maximum shear stress = 3V/(2A)
S. VQ/I and has units of force per unit length
Which matching is correct?
1. Solid rectangular section
2. Solid circular section
3. Conventional symmetric I-section under vertical shear
4. Shear flow q
P. Maximum shear stress = 4V/(3A)
Q. Maximum shear stress generally occurs in the web near the neutral axis
R. Maximum shear stress = 3V/(2A)
S. VQ/I and has units of force per unit length
Which matching is correct?
Explanation:
A solid rectangular section has maximum transverse shear stress equal to 3V/(2A), so item 1 matches R. A solid circular section has maximum transverse shear stress equal to 4V/(3A), so item 2 matches P. A conventional symmetric I-section generally develops its largest vertical shear stress in the web near the neutral axis, so item 3 matches Q. Shear flow is q = VQ/I and carries units of force per unit length, so item 4 matches S. Therefore Option A gives the correct complete matching.
వివరణ:
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: A. τ = VQ/(Ib) సమాధానం: A.
-
Question 2 ప్రశ్న 2Answer: B. The first moment about the neutral axis of the portion of area above or below the level where shear stress is being evaluated సమాధానం: B.
-
Question 3 ప్రశ్న 3Answer: C. Length cubed సమాధానం: C.
-
Question 4 ప్రశ్న 4Answer: C. It is parabolic, zero at the extreme fibres and maximum at the neutral axis. సమాధానం: C.
-
Question 5 ప్రశ్న 5Answer: B. τavg = V/A and τmax = 3V/(2A) సమాధానం: B.
-
Question 6 ప్రశ్న 6Answer: A. τavg = 2.50 MPa and τmax = 3.75 MPa సమాధానం: A.
-
Question 7 ప్రశ్న 7Answer: C. 2.813 MPa సమాధానం: C.
-
Question 8 ప్రశ్న 8Answer: C. 69.3 mm సమాధానం: C.
-
Question 9 ప్రశ్న 9Answer: C. 150 mm సమాధానం: C.
-
Question 10 ప్రశ్న 10Answer: A. τ = [4V/(3A)](1 - y²/R²) సమాధానం: A.
-
Question 11 ప్రశ్న 11Answer: B. 5.89 MPa సమాధానం: B.
-
Question 12 ప్రశ్న 12Answer: C. It equals the average shear stress. సమాధానం: C.
-
Question 13 ప్రశ్న 13Answer: D. 9/8 సమాధానం: D.
-
Question 14 ప్రశ్న 14Answer: B. Most of the significant transverse shear stress is associated with the web, and the maximum generally occurs at the neutral axis within the web. సమాధానం: B.
-
Question 15 ప్రశ్న 15Answer: D. 30.47 MPa సమాధానం: D.
-
Question 16 ప్రశ్న 16Answer: A. q ≈ 253.7 N/mm; τweb ≈ 25.37 MPa; τflange ≈ 1.69 MPa సమాధానం: A.
-
Question 17 ప్రశ్న 17Answer: B. q = 250 N/mm and τ = 25 MPa సమాధానం: B.
-
Question 18 ప్రశ్న 18Answer: A. q has units of force per unit length and is related to local shear stress by q = τt. సమాధానం: A.
-
Question 19 ప్రశ్న 19Answer: A. Because a varying bending moment changes the longitudinal bending-force resultants between neighbouring sections, requiring longitudinal force transfer by shear. సమాధానం: A.
-
Question 20 ప్రశ్న 20Answer: C. It is zero because V = 0. సమాధానం: C.
-
Question 21 ప్రశ్న 21Answer: C. Bending normal stress is zero while transverse shear stress is maximum. సమాధానం: C.
-
Question 22 ప్రశ్న 22Answer: C. 1.125 V/A సమాధానం: C.
-
Question 23 ప్రశ్న 23Answer: A. The nominal average is about 9.30 MPa, so the maximum web stress is about 3.28 times the average. సమాధానం: A.
-
Question 24 ప్రశ్న 24Answer: B. 1, 2 and 4 only సమాధానం: B.
-
Question 25 ప్రశ్న 25Answer: A. 1-R, 2-P, 3-Q, 4-S సమాధానం: A.
