Please keep at least one language enabled. || కనీసం ఒక భాషను ఎంచుకోండి.
Question 1
ప్రశ్న 1
For a two-dimensional state of stress, which statement correctly describes Mohr's circle of stress?
Explanation:
Mohr's circle is a graphical representation of the plane-stress transformation equations. A point on the circle represents the normal and shear stresses acting on a particular physical plane orientation. The horizontal coordinate is normally used for normal stress, while the vertical coordinate represents shear stress according to the selected sign convention. Principal stresses and maximum in-plane shear stress can both be obtained directly from the circle. Therefore Option A correctly describes the purpose of Mohr's circle.
వివరణ:
Question 2
ప్రశ్న 2
For plane stress components σx, σy and τxy, which expressions give the centre C and radius R of Mohr's circle?
Explanation:
The centre of Mohr's circle lies on the normal-stress axis at the mean normal stress. Thus C = (σx + σy)/2. The radius is obtained from the distance between the centre and either stress point representing a pair of perpendicular faces. This gives R = √[((σx - σy)/2)^2 + τxy²]. These expressions are identical to those obtained analytically from the plane-stress transformation equations. Therefore Option B is correct.
వివరణ:
Question 3
ప్రశ్న 3
At a point, σx = 80 MPa, σy = 20 MPa and τxy = 30 MPa. What are the centre and radius of Mohr's circle?
Explanation:
The centre is the average normal stress, so C = (80 + 20)/2 = 50 MPa. Half the difference of the normal stresses is (80 - 20)/2 = 30 MPa. The radius is therefore √(30² + 30²) = approximately 42.43 MPa. The principal stresses would consequently be 50 ± 42.43 MPa. Hence Option C gives the correct centre and radius.
వివరణ:
Question 4
ప్రశ్న 4
For the stress state σx = 80 MPa, σy = 20 MPa and τxy = 30 MPa, what are the principal stresses and the maximum in-plane shear stress?
Explanation:
From the preceding circle geometry, the centre is 50 MPa and the radius is approximately 42.43 MPa. The principal stresses occur where the circle intersects the normal-stress axis. Thus σ1 = 50 + 42.43 = 92.43 MPa and σ2 = 50 - 42.43 = 7.57 MPa. The maximum in-plane shear stress equals the radius of Mohr's circle, namely 42.43 MPa. Therefore Option A is correct.
వివరణ:
Question 5
ప్రశ్న 5
A point is subjected to pure shear stress τxy = 40 MPa, with σx = σy = 0. What does Mohr's circle give?
Explanation:
For pure shear, both original normal stresses are zero. The centre of Mohr's circle is therefore at the origin. Its radius equals the magnitude of the applied shear stress, which is 40 MPa. The circle intersects the normal-stress axis at +40 MPa and -40 MPa. Thus pure shear corresponds to equal tensile and compressive principal stresses, making Option A correct.
వివరణ:
Question 6
ప్రశ్న 6
A material point is subjected to uniaxial tensile stress σx = 100 MPa, while σy = 0 and τxy = 0. What are the centre and radius of its Mohr's circle?
Explanation:
The mean normal stress is (100 + 0)/2 = 50 MPa. Because there is no shear stress, the radius is simply half the difference between the two normal stresses. Thus R = (100 - 0)/2 = 50 MPa. The resulting circle extends from 0 MPa to 100 MPa on the normal-stress axis. Therefore Option B is correct.
వివరణ:
Question 7
ప్రశ్న 7
At a point, σx = σy = 60 MPa and τxy = 0. How is the corresponding Mohr's circle represented?
Explanation:
The centre of the circle is (60 + 60)/2 = 60 MPa. The radius is √[((60 - 60)/2)² + 0²] = 0. A zero-radius circle degenerates into a single point on the normal-stress axis. This indicates that the normal stress is 60 MPa and shear stress is zero on every in-plane orientation. Therefore Option C is correct.
వివరణ:
Question 8
ప్రశ్న 8
For σx = σy = 60 MPa and τxy = 25 MPa, what are the centre, radius and principal stresses of Mohr's circle?
Explanation:
The mean normal stress is 60 MPa because σx and σy are equal. The normal-stress difference contributes nothing to the circle radius. Therefore the radius is simply |τxy| = 25 MPa. The principal stresses are 60 + 25 = 85 MPa and 60 - 25 = 35 MPa. Hence Option A is correct.
వివరణ:
Question 9
ప్రశ్న 9
A plane-stress state has σx = 100 MPa, σy = -20 MPa and τxy = 40 MPa. What are the centre and radius of Mohr's circle and the corresponding principal stresses approximately?
Explanation:
The centre is C = [100 + (-20)]/2 = 40 MPa. Half the normal-stress difference is [100 - (-20)]/2 = 60 MPa. The radius is √(60² + 40²) = approximately 72.11 MPa. Therefore the principal stresses are 40 + 72.11 = 112.11 MPa and 40 - 72.11 = -32.11 MPa. Hence Option A is correct.
వివరణ:
Question 10
ప్రశ్న 10
Adopt a Mohr-circle convention in which tensile normal stress is positive to the right, positive shear stress is plotted upward, and the x-face is represented by X = (σx, τxy). If the physical x'-axis is rotated counterclockwise through an angle θ from the x-axis, how is the corresponding point reached from X on Mohr's circle?
Explanation:
Stress transformation contains sin2θ and cos2θ terms, so the angular movement on Mohr's circle is twice the physical rotation angle. Under the specific convention stated in the question, a positive counterclockwise physical-axis rotation produces movement in the opposite sense on the circle. Therefore the Mohr-circle point moves clockwise. Its angular movement is 2θ rather than θ. Hence Option D is correct for the explicitly stated convention.
వివరణ:
Question 11
ప్రశ్న 11
Two stress states corresponding to two physical planes have their points separated by an arc angle of 80° on Mohr's circle. What is the angular separation between the normals to the corresponding physical planes?
Explanation:
Angular movement on Mohr's circle is twice the corresponding physical rotation of the plane normal. Therefore a Mohr-circle angle of 80° represents a physical angular change of 80°/2. This gives a physical-plane-normal separation of 40°. The sense of rotation depends on the adopted plotting convention, but the magnitude relationship remains a factor of two. Therefore Option B is correct.
వివరణ:
Question 12
ప్రశ్న 12
How are the planes of maximum in-plane shear oriented relative to the principal planes, and how is this represented on Mohr's circle?
Explanation:
Principal planes have zero shear stress and correspond to the horizontal-axis intercepts of Mohr's circle. Maximum in-plane shear occurs at the top and bottom of the circle. These locations are 90° around Mohr's circle from a principal-stress point. Because Mohr-circle angles are twice physical angles, the corresponding physical planes differ by 45°. Therefore Option B is correct.
వివరణ:
Question 13
ప్రశ్న 13
Use the convention that positive τxy acts in the +y direction on the +x face and that positive shear is plotted upward on Mohr's circle. For σx = 80 MPa, σy = 20 MPa and τxy = +30 MPa, the x'-axis is rotated 30° counterclockwise from x. What stresses act on the x'-face approximately?
Explanation:
The physical rotation is 30°, corresponding to a 60° angular movement on Mohr's circle under the stated convention. Analytically, σx' = 50 + 30 cos60° + 30 sin60°. This gives σx' ≈ 90.98 MPa. The transformed shear is -30 sin60° + 30 cos60° ≈ -10.98 MPa. Therefore Option A is correct.
వివరణ:
Question 14
ప్రశ్న 14
A Mohr's circle has its centre at σ = 35 MPa and radius 25 MPa. What are the principal stresses and maximum in-plane shear stress?
Explanation:
The principal stresses are the two intersections of Mohr's circle with the normal-stress axis. These intersections occur at C + R and C - R. Thus σ1 = 35 + 25 = 60 MPa and σ2 = 35 - 25 = 10 MPa. The maximum in-plane shear stress equals the radius, which is 25 MPa. Therefore Option A is correct.
వివరణ:
Question 15
ప్రశ్న 15
The principal stresses represented by a Mohr's circle are 120 MPa and 40 MPa. What are the centre and radius of the circle?
Explanation:
The centre is the average of the two principal stresses. Therefore C = (120 + 40)/2 = 80 MPa. The radius is one-half of the difference between the principal stresses. Hence R = (120 - 40)/2 = 40 MPa. Therefore Option B is correct.
వివరణ:
Question 16
ప్రశ్న 16
Under the convention that the x-face stress point is X = (σx, τxy) and the perpendicular y-face stress point is Y = (σy, -τxy), what is the geometrical relationship between X and Y on Mohr's circle?
Explanation:
The stresses on the x- and y-faces correspond to physical planes whose normals differ by 90°. A 90° physical rotation corresponds to a 180° movement on Mohr's circle. Their representative points are therefore located at opposite ends of a diameter. The midpoint of the line joining them is the circle centre at the average normal stress. Hence Option C is correct.
వివరణ:
Question 17
ప్రశ్న 17
A Mohr's circle passes through the origin of the σ-τ coordinate system. Which statement must be true about the two in-plane principal stresses?
Explanation:
The principal stresses are the points where Mohr's circle intersects the normal-stress axis. If the circle passes through the origin, the origin itself is one of those horizontal-axis intersections. Therefore one of the two in-plane principal stresses is zero. Equivalently, the product σ1σ2 is zero. Hence Option B is correct.
వివరణ:
Question 18
ప్రశ్న 18
Use the convention that positive τxy acts in the +y direction on the +x face, positive shear is plotted upward, and physical angles are measured counterclockwise from the x-axis to the x'-axis. For σx = 60 MPa, σy = -20 MPa and τxy = +30 MPa, what is the smallest positive orientation of the major principal direction and one corresponding maximum-shear direction?
Explanation:
For this stress state, tan2θp = 2τxy/(σx - σy) = 60/80 = 0.75. Therefore 2θp ≈ 36.87° and θp ≈ 18.43°. Substitution into the transformation equations confirms that this orientation gives the larger principal stress of 70 MPa. A maximum in-plane shear direction is 45° from a principal direction. Thus one corresponding orientation is 18.43° + 45° = approximately 63.43°, making Option A correct.
వివరణ:
Question 19
ప్రశ్న 19
Using the convention X = (σx, τxy), a stress state is represented by X = (60 MPa, 30 MPa) and the perpendicular-face point Y = (-20 MPa, -30 MPa). What are the Mohr-circle centre, radius and principal stresses?
Explanation:
The centre is the midpoint of the diametrically opposite stress points X and Y. Its normal-stress coordinate is (60 - 20)/2 = 20 MPa, while its shear coordinate is zero. The radius is the distance from C to X, namely √[(60 - 20)² + 30²] = 50 MPa. The principal stresses are therefore 20 ± 50 MPa, giving 70 MPa and -30 MPa. Hence Option A is correct.
వివరణ:
Question 20
ప్రశ్న 20
A point on Mohr's circle has coordinates (σ, τ) = (90 MPa, -20 MPa), and the circle centre is at σ = 50 MPa. What are the principal stresses approximately?
Explanation:
The radius is the distance from the centre at (50, 0) to the given point at (90, -20). Thus R = √[(90 - 50)² + (-20)²] = √2000 ≈ 44.72 MPa. The principal stresses are the centre plus and minus this radius. They are therefore approximately 94.72 MPa and 5.28 MPa. Hence Option B is correct.
వివరణ:
Question 21
ప్రశ్న 21
A Mohr's circle intersects the normal-stress axis at +100 MPa and +20 MPa. What can be concluded about the normal stress on every possible in-plane orientation?
Explanation:
The two horizontal-axis intercepts are the maximum and minimum in-plane normal stresses. Here both principal stresses are positive, with the smaller one equal to +20 MPa. Every transformed normal stress lies between these two principal values. Therefore the normal stress remains positive for every in-plane orientation under the tension-positive convention. Hence Option A is correct.
వివరణ:
Question 22
ప్రశ్న 22
A Mohr's circle has centre at σ = -10 MPa and radius 50 MPa. What normal stress acts on the planes of maximum in-plane shear, and what are the principal stresses?
Explanation:
Maximum in-plane shear occurs at the top and bottom points of Mohr's circle. These points have the same normal-stress coordinate as the centre of the circle. Therefore the associated normal stress is -10 MPa. The principal stresses are C + R = -10 + 50 = +40 MPa and C - R = -10 - 50 = -60 MPa. Hence Option B is correct.
వివరణ:
Question 23
ప్రశ్న 23
A point is subjected to equal biaxial compressive stresses of 80 MPa with zero in-plane shear. Taking tensile normal stress as positive, what does its Mohr's circle look like?
Explanation:
Under the tension-positive convention, both normal stresses are σx = σy = -80 MPa. The centre is therefore -80 MPa. The radius is zero because both the normal-stress difference and shear stress are zero. Mohr's circle consequently degenerates into a single point at (-80 MPa, 0). Therefore Option B is correct.
వివరణ:
Question 24
ప్రశ్న 24
Consider the following statements about Mohr's circle for plane stress:
1. The circle centre is located at the mean in-plane normal stress.
2. The circle radius equals the maximum in-plane shear stress.
3. A 30° physical rotation of a plane normal corresponds to a 30° angular movement on Mohr's circle.
4. Principal-stress points lie on the normal-stress axis where shear stress is zero.
Which statements are correct?
1. The circle centre is located at the mean in-plane normal stress.
2. The circle radius equals the maximum in-plane shear stress.
3. A 30° physical rotation of a plane normal corresponds to a 30° angular movement on Mohr's circle.
4. Principal-stress points lie on the normal-stress axis where shear stress is zero.
Which statements are correct?
Explanation:
Statement 1 is correct because the circle centre is at (σx + σy)/2 on the normal-stress axis. Statement 2 is correct because the circle radius represents the maximum magnitude of in-plane shear stress. Statement 3 is incorrect because the angular movement on Mohr's circle is twice the corresponding physical rotation, so a 30° physical rotation corresponds to 60° on the circle. Statement 4 is correct because principal planes have zero shear stress and therefore appear at the horizontal-axis intersections. Consequently Statements 1, 2 and 4 are correct and Option B is the unique answer.
వివరణ:
Question 25
ప్రశ్న 25
Match each Mohr-circle feature with its correct interpretation:
1. Centre of circle
2. Rightmost horizontal-axis intercept
3. Top or bottom point of circle
4. Diameter joining stress points of mutually perpendicular physical planes
P. Major principal stress
Q. Mean normal stress
R. Maximum-magnitude in-plane shear stress with associated normal stress equal to the mean
S. Stress states on planes whose normals differ physically by 90°
Which matching is correct?
1. Centre of circle
2. Rightmost horizontal-axis intercept
3. Top or bottom point of circle
4. Diameter joining stress points of mutually perpendicular physical planes
P. Major principal stress
Q. Mean normal stress
R. Maximum-magnitude in-plane shear stress with associated normal stress equal to the mean
S. Stress states on planes whose normals differ physically by 90°
Which matching is correct?
Explanation:
The circle centre represents the mean normal stress, so item 1 matches Q. The rightmost normal-axis intercept is the maximum or major in-plane principal stress, so item 2 matches P. The top and bottom points have shear magnitude equal to the radius and normal stress equal to the mean, so item 3 matches R. Stress points for mutually perpendicular physical planes are diametrically opposite because a 90° physical change corresponds to 180° on Mohr's circle, so item 4 matches S. Therefore Option A gives the correct complete matching.
వివరణ:
Answer Key సమాధానాల పట్టిక
-
Question 1 ప్రశ్న 1Answer: A. It is a graphical representation of the variation of normal and shear stress with plane orientation. సమాధానం: A.
-
Question 2 ప్రశ్న 2Answer: B. C = (σx + σy)/2 and R = √[((σx - σy)/2)^2 + τxy^2] సమాధానం: B.
-
Question 3 ప్రశ్న 3Answer: C. C = 50 MPa and R ≈ 42.43 MPa సమాధానం: C.
-
Question 4 ప్రశ్న 4Answer: A. σ1 = 92.43 MPa, σ2 = 7.57 MPa and τmax = 42.43 MPa సమాధానం: A.
-
Question 5 ప్రశ్న 5Answer: A. Centre = 0, radius = 40 MPa, and principal stresses = +40 MPa and -40 MPa సమాధానం: A.
-
Question 6 ప్రశ్న 6Answer: B. C = 50 MPa and R = 50 MPa సమాధానం: B.
-
Question 7 ప్రశ్న 7Answer: C. A single point at σ = 60 MPa and τ = 0 సమాధానం: C.
-
Question 8 ప్రశ్న 8Answer: A. C = 60 MPa, R = 25 MPa, σ1 = 85 MPa and σ2 = 35 MPa సమాధానం: A.
-
Question 9 ప్రశ్న 9Answer: A. C = 40 MPa, R = 72.11 MPa, σ1 = 112.11 MPa and σ2 = -32.11 MPa సమాధానం: A.
-
Question 10 ప్రశ్న 10Answer: D. By moving clockwise through 2θ సమాధానం: D.
-
Question 11 ప్రశ్న 11Answer: B. 40° సమాధానం: B.
-
Question 12 ప్రశ్న 12Answer: B. They are 45° from the principal planes physically and 90° from the principal-stress points on Mohr's circle. సమాధానం: B.
-
Question 13 ప్రశ్న 13Answer: A. σx' = 90.98 MPa and τx'y' = -10.98 MPa సమాధానం: A.
-
Question 14 ప్రశ్న 14Answer: A. σ1 = 60 MPa, σ2 = 10 MPa and τmax = 25 MPa సమాధానం: A.
-
Question 15 ప్రశ్న 15Answer: B. C = 80 MPa and R = 40 MPa సమాధానం: B.
-
Question 16 ప్రశ్న 16Answer: C. They are diametrically opposite points. సమాధానం: C.
-
Question 17 ప్రశ్న 17Answer: B. One of the principal stresses is zero. సమాధానం: B.
-
Question 18 ప్రశ్న 18Answer: A. Principal direction ≈ 18.43° and maximum-shear direction ≈ 63.43° సమాధానం: A.
-
Question 19 ప్రశ్న 19Answer: A. C = 20 MPa, R = 50 MPa, σ1 = 70 MPa and σ2 = -30 MPa సమాధానం: A.
-
Question 20 ప్రశ్న 20Answer: B. 94.72 MPa and 5.28 MPa సమాధానం: B.
-
Question 21 ప్రశ్న 21Answer: A. It is tensile for every in-plane orientation. సమాధానం: A.
-
Question 22 ప్రశ్న 22Answer: B. Normal stress = -10 MPa; principal stresses = +40 MPa and -60 MPa సమాధానం: B.
-
Question 23 ప్రశ్న 23Answer: B. A single point at σ = -80 MPa and τ = 0 సమాధానం: B.
-
Question 24 ప్రశ్న 24Answer: B. 1, 2 and 4 only సమాధానం: B.
-
Question 25 ప్రశ్న 25Answer: A. 1-Q, 2-P, 3-R, 4-S సమాధానం: A.
